Type in the full discussion title or a part of it.
Discussion Title Created date
Lead free solder from my flow soldering machine
I have 72Kg of lead free solder (99%Sn 1%Cu) maker was Stannol. recovered from my flow solder machine solder pot. I'm retiring to the Isle of Wight so the machine is being...
Mon. Oct 31, 2016 - 01:02 PM
Programming mega88pb with avr studio 4
The device isn't in the chip list... is there any way to add the device parameters ? Or am I forced to go to Studio 6 ? By  selecting mega88P I can erase, set/change fuses...
Fri. Sep 4, 2015 - 09:12 PM
IteadStudio problems
Anyone else seeing delivery/acknowledge problems ? I sent a PCB off 3 weeks ago and heard nothing... and no replies to my emails :(
Sat. Aug 15, 2015 - 10:52 AM
Help with ADC problems (solved)
System is Mega48PA, 4.6864MHz powered by 4.2V Lipo and charged by USB. It has 2 digit LED multilplexed and TXd comms at 1200 baud for debug. AVcc is connected to Vcc(+100nF) and...
Sun. Aug 2, 2015 - 09:00 PM
Another simple I/R transmission system
Originally used in an 8051 based laser tag system although easily cross assembled into AVR assembler. No need for interrupts or timers, just simple timing loops. Here is part of...
Tue. Jul 21, 2015 - 02:33 PM
Help with software to drive WS2812 LEDs bytewise...
Could someone help with some feasibility driving the WS2812B LEDs... The simple line driven stuff I'm ok with using ASM to do the bit bashing. In another post, I alluded to the...
Thu. Dec 5, 2013 - 11:40 AM
Help with ADC code M48
I have this bit of code sort of working but it doesn't do what it says on the tin.... I have 100K from battery (12V) to AIN6 and 51K from there to a port pin, which I ground to...
Mon. Feb 25, 2013 - 06:37 PM
jungo avrisp mkii and win98
Tried the suggestions in the sticky but no luck. I accidentally deleted vmm32.vxd so had to reload win 98. No problem there, everyting came back on my desktop as it was. But now...
Sun. Sep 30, 2012 - 03:54 PM
Blown Dragon :(
Anybody know what the MOSI/MISO/SCK/RST driver chips are on this board? FETs I guess as a couple are low resistance to GND.. :(
Wed. Aug 29, 2012 - 07:29 PM
New tiny 828 data sheet error
Just been looking at this device and it seems Atmel are still using code examples with errors...(I think). They are showing code examples for setting various control registers >31...
Tue. Aug 21, 2012 - 09:45 AM
AS6 install issue- no examples loaded
Due to network systems issues and laptop on VPN, somehow the installer didn't install any of the examples for AS6. Can someone tell me where they are ordinarily installed to ? TIA
Thu. Jun 28, 2012 - 01:10 PM
Radiometrix RX2 Gotcha
I've been playing with their Tx2/Rx2 /433 with good success.... I thought I'd be smart and use their 'carrier detect' example from one of their data sheets.... It would cut down...
Fri. Jun 1, 2012 - 09:07 PM