Type in the full discussion title or a part of it.
Discussion Title Created date
How do ICs with FET push/pull outputs avoid shoot through?
Hi - I've been trying to work this out in my head... Let's say you have an IC that has a FET push/pull output. So I suspect that they have a complementary pair of FETs on the...
Monday, 22 March 2010 - 18:25
Calculating MOSFET gate charge
I've been trying to better my understanding of MOSFET characteristics. I figure that's a fairly important skill to have. So - I'm trying to see if I can derive and understand some...
Tuesday, 16 March 2010 - 22:53
Switching high voltage (5KV+)
Howdy folks - in the near future I may need to build a circuit that switches on/off a high voltage (5-10KV) load. I can switch either the high or the low side. Current will be in...
Friday, 5 March 2010 - 23:44
sockets for leaded discretes
Hi - I'm looking to make a very configurable PCB test board. Specifically, I want to be able to plug discrete components into it quickly and easily. Does anybody know of any...
Wednesday, 3 March 2010 - 16:22
Using multiple diodes in series to increase voltage rating
How legit is this? I had always assumed that it wouldn't work, as you couldn't guarantee that the diodes had the same voltage drop across them (due to manufacturing variations) -...
Monday, 8 February 2010 - 20:27
How to generate a slightly negative voltage?
Howdy - I need to generate a supply that is just slightly negative. Like I only need -.25V or so. A bit more would be fine - but not much. Certainly no more than -1V. It will be...
Monday, 25 January 2010 - 19:47
calling those that know logic chips
Hi - I need to find a schmitt trigger buffer or inverter. It needs to be able to handle a 3.3V level input, but have a 5V output. Ideally there'd be a family with a wide range of...
Monday, 18 January 2010 - 19:01
Where to buy scope probe connector?
Hi - I'm looking to pick up a PCB mount scope probe connector. What, you say? Yeah, I have no idea what they're called. They're little vertical connectors that allow you to plug a...
Monday, 11 January 2010 - 22:00
PCB mount banana jack
Anybody know of some PCB mount banana jacks? I can't remember ever seeing any.
Thursday, 7 January 2010 - 16:56
Mega ceramics
I want some really freaking huge ceramic capacitors. I'm working on a 6.6A, 43V DC/DC boost converter that is operating at 1MHz - and I want as little ripple as possible. That...
Saturday, 5 December 2009 - 19:03
How does thermal cycling affect Lithium polymer cells?
Howdy - I can't seem to find much good information regarding lithium polymer cells. I've had to piece together little bits and pieces from all over the Internets. What I'm curious...
Thursday, 8 October 2009 - 18:56
How to speed up this high side FET driver
Hi there - I'm working on a high side FET driver for a 1MHz boost converter. The simulation of it looks... OK. Not as bad as it could be, but certainly not good. I've attached a...
Thursday, 27 August 2009 - 12:32

Pages