Post Created date
Does comparison window work for SAME70 ADC conversion free run?
After much of work I got the answer: yes it works in a free run mode. I use AFEC Async driver. I set the interrupt to trigger only for the out-of-window limits breach and my...
Saturday, 9 May 2020 - 19:39
Rebuilding a Atmel studio 7 solution using -mfloat-abi=hard
The precise nature of my problem was the same as the original post except my target as I mentioned earlier is SAME70. Floating point did not work with hardware FPU and I tried all...
Tuesday, 14 January 2020 - 00:20
Rebuilding a Atmel studio 7 solution using -mfloat-abi=hard
How many threads you expect to be created on the same topic? And how many times you expect to see the same changes made which are repeated yet again from this topic and from...
Monday, 13 January 2020 - 14:00
Rebuilding a Atmel studio 7 solution using -mfloat-abi=hard
I tried all these changes to the properties of my SAM E70 project (Cortex-M7 changes) but still floating point does not work. I manually added the missing...
Monday, 13 January 2020 - 05:34
Unable to print Floating point number
Fast foward to January 2020 -> still float math does not work after all those recommendations found here. No symbols are there to compiler other than DEBUG. This library...
Monday, 13 January 2020 - 01:41
START PWM Fault management for SAM E70 ?
Fault external inputs miraculously worked as configured. PWM outputs dropped to '0' when fault/break button pressed and restored when button released. Screenshots of configuration...
Wednesday, 4 December 2019 - 02:45
START PWM Fault management for SAM E70 ?
A closely related question should be added to the previous: START wizard allows to choose a glitch filtering to the fault input through external GPIO pin. So if I activate this...
Tuesday, 3 December 2019 - 23:03
What are external dependencies for ASF4 project?
how to delete this post?
Friday, 29 November 2019 - 18:34
What are external dependencies for ASF4 project?
Thank you Lajon, you pointed me in right direction. I was looking into the "dependencies" directory before building the project because the archived copy of the project directory...
Friday, 29 November 2019 - 18:23
What are external dependencies for ASF4 project?
May be I should clarify my question to be better understood. Are there external dependencies to the ASF4 project which are not loaded to the project folder? libm is one, anything...
Thursday, 28 November 2019 - 22:35
ASF4 START - Out of the box spi dma example seems not to work
The post marked as a solution does not contain anything which could be used as a solution. Working DMA code or configuration steps showing how to add DMA to the SPI registers in...
Friday, 22 November 2019 - 18:59
Best IDE and configurator tools to start SAM E70 MCU development ?
Hi avrdude, I tested many examples with ASF3, I checked out Harmony 3 drivers and got all available ASF4 drivers I could find out of what I need . The conclusion is this: The most...
Monday, 9 September 2019 - 18:09