Post Created date
FatFs halting sometimes
Update: Apparently this is a known bug, described on the Errata section of the ATSAM4L datasheet (pg.1192).    The bug (as described on the datasheet) is:   In...
Tuesday, 3 April 2018 - 23:31
Can't program fuses
Yes, I thought about that too. But it did seem to me more like a bug. And I even got scared when I searched online and saw a post saying that the AVRISP mkII can't program...
Saturday, 17 March 2018 - 16:52
Can't program fuses
Well, erasing the device before setting the fuses did solve the problem. I truly didn't know that, specially since the fuses were set to FF / FF / FE / FF, and I was bring bits to...
Saturday, 17 March 2018 - 01:18
XMEGA256 EEPROM issue
kabasan wrote: When using EEPROM, please also enable BOD.   Kabasan,   That was exactly it! I enabled the BOD to continuous mode @ 3.0V and the problem disappeared!...
Saturday, 17 March 2018 - 01:11
XMEGA256 EEPROM issue
Well, in my case, rewritting of the EEPROM is not being done at anytime, so I don't think its getting corrupted because of a Vcc below the minimum for NVM rewrite. The EEPROM has...
Friday, 16 March 2018 - 02:44
XMEGA256 EEPROM issue
kabasan wrote: When using EEPROM, please also enable BOD.   This actually explains a lot. The problem is triggered by power on/power off, and brown-out detection was...
Friday, 16 March 2018 - 01:18
XMEGA256 EEPROM issue
Well, the only relevant piece of code in this case is the one that maps the EEPROM into the SRAM:   ; Map EEPROM memory into SRAM address 0x1000-0x17FF for read (Pg.25)...
Thursday, 15 March 2018 - 22:15
I/O's supplied by LCDA have no power
UPDATE: Problem is solved. I'll leave the solution here for the record: The ATSAM4L datasheet says on page 47: "When LCD feature is not used, VLCDIN must be always powered (1.8-3....
Friday, 8 December 2017 - 00:55
32MHz external oscillator
I did search on both the manual and the datasheet. But the one I have looks different from those images you posted. Maybe its an older version. But anyways, thanks for the info. I...
Thursday, 31 August 2017 - 01:51
32MHz external oscillator
By the way, I'm still not finding anything like that on the ATXMEGA256D3 datasheet nor the manual. I looked all over the System Clock and Clock options section and did several...
Thursday, 31 August 2017 - 00:12
32MHz external oscillator
*blush*   So, we can indeed do it. That's good. Thanks for the info.
Thursday, 31 August 2017 - 00:05
Porting ATSAM4LC4 code into ATSAM4LC2
Ops sorry :) I'm kind of a forum noob
Thursday, 13 July 2017 - 06:33

Pages