Type in the full discussion title or a part of it.
Discussion Title Created date
Propagating target "properties" (build settings)
Suppose that I have carefully crafted a set of toolchain settings for the "debug" target configuration of my project. Is there an easy way to propagate or copy those setting to...
Wednesday, 25 November 2015 - 11:17
Peripheral comparison?
I'm looking for some kind of document that describes which Cortex-M microcontrollers have common (or differing) peripheral modules for the various functions. For example, the...
Friday, 6 November 2015 - 08:42
Modern (2015) replacement for WinAVR?
What's the minimal set of downloads people are using to replace WinAVR, now that the Atmel Toolchain doesn't include any of the "loosely associated" unix-like tool executables (...
Wednesday, 7 October 2015 - 01:17
Source for 5x2 1.27mm connectors?
Does someone have a source for the 5x2 1.27mm male pin-header jtag connectors that Atmel likes to leave footprints for on their low-end development boards? The Xplained mini BOM...
Sunday, 20 September 2015 - 09:38
AVR mEDBG or EDBG tool for linux/macos/etc?
Is there an open-source linux or mac tool that can upload code to boards like the Xplained mini 168pb, 328p, and 328pb?   Preferably CLI-based. It looks like avrdude is...
Tuesday, 15 September 2015 - 23:06
avr-gcc produces awful code when using global register variables...
This came up on the Arduino forums...  Avr-gcc supports putting global variables in registers, right?  As in: volatile register unsigned char xxx asm("r3"); ISR(...
Thursday, 3 September 2015 - 06:01
mEDBG USB/Serial Baud rates?
Does anyone know if the mEDBG chip (ATmega32u4 based) used on the Xplained mini eval boards supports baud rates above 57600 in its USB/Serial bridge code? EDBG (AVR32 based, I...
Saturday, 29 August 2015 - 08:40
ATmega328PB
What's the status of this chip?  Announced last november, it's apparently shown up only as the eval board.   That's fairly typical, but in this case: 1) There's no...
Wednesday, 26 August 2015 - 19:41
Revision control for AS
What are my options for revision control add-ons for AS?  Something simple and local, preferably - rcs is my usual choice for single-person projects when I'm not using an IDE...
Monday, 17 August 2015 - 04:25
SAMD10 RTC
So I thought I'd use the RTC peripheral instead of Systick, because it should be easy to have it count microseconds and interrupt on milliseconds, which would be convenient....
Thursday, 13 August 2015 - 04:47
ASF "high level" documentation?
Is there any high-level documentation for ASF (and/or the Atmel toolchains in general)? For example, I just figured out that Atmel Toolchain/ARM GCC/Native/4.8.1443/CMSIS_Atmel/...
Thursday, 6 August 2015 - 09:05
How do real people actually USE Atmel Studio...
From another thread:   , or press the button on the toolbar. I don't think it's particularly onerous to use an icon on the toolbar as an alternative to some key binding....
Thursday, 6 August 2015 - 06:12

Pages