Type in the full discussion title or a part of it.
Discussion Title Created date
Mega128 development board
Can anyone comment on the BDMICRO MAVRIC-IIB board? I could not find current information here at freaks.com The last entry I found is 2005. Thanks
Mon. Jul 22, 2013 - 03:37 PM
AS4 , STK-500 and ATMega328
Problems getting the STK-500 to 'see' a ATMega328P. Using AS 4.18 with the STK-500. (Note: the STK-500 works ok when connected to a ATMega32 on a prototype board. ISP mode.):( I...
Fri. Feb 8, 2013 - 03:13 AM
CodeBlocks, Linux woes.
OK, after a previous attempt to get my avr-gcc and CodeBlock to install/operational , . I must be making some progress, I installed Arduino, ordered a UNO and that is working on...
Sat. Dec 22, 2012 - 12:16 AM
Another try using CodeBlocks and avr-gcc
After a previous post and attempting again to get CB to work with avr-gcc I made 'some' progress. CodeBlocks will compile a simple C program for the PC and it will execute as well...
Wed. Dec 5, 2012 - 02:52 AM
WinAVR and GCC for Atmel devices
I don't use GCC/WinAVR at this time. I am using ICCAVR 7.x and did not like the ICCAVR version 8. So, I have some interest in using one of the above mentioned. What is the...
Thu. Oct 25, 2012 - 04:39 PM
ATtiny85 Timer1 deadtime
Taking a closer look at the Tiny85 Timer and I am wondering what is the common usage of the deadtime generator? I have not found a use for that feature yet. Hopefully someone can...
Sat. Oct 6, 2012 - 10:06 PM
Battery power for ATtiny85
I am considering using an LM1117T 3.3 regulator to supply an ATtiny85. The only micro function is to drive a 12 VDC output (via a N channel MOSFET). The project power supply is a...
Thu. Sep 20, 2012 - 04:21 PM
STK-500 ok Dragon NO
I just received a new Dragon, installed and used the upgrade firmware. Everything looked good. However, I can not get the Dragon to connect using ISP mode with a Tiny12 or Tiny85...
Sat. Jul 7, 2012 - 06:14 PM
ATtiny85 port pins floating
In using the ATtiny85 in a battery powered application I am looking for the best pin setting for unused pins. I am only using PB.0 as an output the other pins including RESET are...
Fri. Jul 6, 2012 - 11:35 PM
ATtiny85 WDT and sleep modes.
I am using the ATtiny85, ICCAVR(version 7.22C) and AS4.18 The main loop is only to generate a series of pulses until time to stop and delay for about 2 seconds then resume with...
Sun. Jun 24, 2012 - 07:42 PM
Resistor size to measure current
Hello, I am afraid the fuse in my DMM for measuring current is blown :( I want to determine the amount of current a project (ATtiny85) is consuming. The power source is a 12V 1.4...
Thu. Jun 21, 2012 - 05:11 PM
assembly avr tiny and 'ld'
Hello, I am using a ATtiny12 which has no RAM. I am not having any difficulties except in experimenting with the indirect 'LD' instruction. The tiny12 manual list the LD as a...
Mon. Jun 4, 2012 - 02:14 PM