Post Created date
can't get ASF USB driver to work
Thank you. I'll respond after going through the doc.
Thursday, 8 December 2016 - 08:58
SAME70J21 SPI0 MISO
It says ERROR ADDING COMPONENT Unable to add SPI Reason: No implementations available for SPI_0 in current context Seems like SPI won't work in this IC
Wednesday, 7 December 2016 - 12:07
SAME70J21 SPI0 MISO
Kindly check http://start.atmel.com/#dashboard try to create a project using SAME70J21 & check its PINMUX. It seems like there is is some issue.
Wednesday, 7 December 2016 - 12:02
can't get ASF USB driver to work
Me too having issues with SAM E70. Am trying to get the USB Host working. But sadly it isn't working.
Wednesday, 7 December 2016 - 11:19
ATSAME70 USBHS DPRAM
Guys, got some progress on USB HOST using SAM E70? Am also stuck on the same issue. Please help.
Wednesday, 7 December 2016 - 10:49
USB Host operation using SAM E70
I am able to detect USB device connected to my dev board. Logical Unit Number has been assigned to the flash drive. But sadly I couldn't communicate with the drive.
Wednesday, 7 December 2016 - 09:41
USB Host operation using SAM E70
So far, no Luck. Am now going through AT09339: Application note. It might shed some light on what am doing.
Wednesday, 7 December 2016 - 04:16
SAME70J21 SPI0 MISO
Ref. Table 40-2 there, they have mentioned signals & I/O lines.
Monday, 5 December 2016 - 06:15
SAME70J21 SPI0 MISO
II suppose "SPI0_MISO" pins in "PD20". I did notice hat they have missed out PD20 in 64 pin package in SAM E70 datasheet.
Monday, 5 December 2016 - 06:13
USB Host operation using SAM E70
Thank you asterix86. This simple reply will help me a lot in my work ahead. I'll get back after I do some testing with the newly developed program.
Monday, 5 December 2016 - 05:58
ADC/AFEC in SAM E70, HELP!!!
Getting used to ASF is hard. Since we have chosen Atmel SAM E70 for our project, we have got no other choice other than to take the hard way."Do-learn-move_on". Anyway, thanks for...
Friday, 2 December 2016 - 05:11
ADC/AFEC in SAM E70, HELP!!!
Thanks hraftery for notifying. Now the program is working great.
Friday, 2 December 2016 - 04:01

Pages