Type in the full discussion title or a part of it.
Discussion Title Created date
MPLAB Snap with ATSAM processors?
I recently bought a MPLAB Snap in circuit debugger to test if it could be used with my SAMD20G16B. I connected the pins: MCLR to the Reset pin of the SAM Vdd to the 3.3V rail 0V...
Friday, 11 October 2019 - 05:11
[TUT][HARD]Programming mega64, mega128, mega1281, mega2561
Tutorial Hardware - Serial Programming of the mega64, mega128, mega1281, mega2561 Unlike most AVRs the mega64, mega128, mega1281 and mega2561 do not use the SPI pins for serial...
Wednesday, 20 April 2011 - 23:16
Running SPI even slower on ATmega32?
Hi, Is it possible to run the SPI clock even slower than Fosc/128? I have to talk to an older device that is specified at 5kHz for the clock speed and I can't see any other...
Friday, 12 February 2010 - 05:14
Best way to stop interrupt timer?
When using interrupts with timer0 or timer1 what is the best way to stop the timer or stop the timer interrupt from occuring during the program running? Either setting the clock...
Sunday, 16 December 2007 - 23:33
Best place to learn about PWM?
I have been using micros, especially the AVRs for a while, and now the need to learn about how to use PWM has come up. I have seen Jaspers miniDDS and other code on the net but...
Friday, 20 July 2007 - 02:05
Timer difference m16 and 2313?
I am working out the timer delays for different crystals using a Mega16 that came with a STK500. Everything is ok using this code...
Thursday, 27 July 2006 - 01:14