Type in the full discussion title or a part of it.
Discussion Title Created date
UART interrupts and DMA transfer in parallel
Dear all,   I'm using a E70 device. Is it possible that if DMA transfer is configured for an UART that the 'normal' receive/transmit interrupts are not active ? I have a...
Wednesday, 17 August 2016 - 10:40
DMA channel interrupt registers not displaying the actual condition?
Dear all,   I'm using a E70 device. While playing with DMA (better XDMA) I discovered that the values for the different interrupts in the CIM (Channel Interrupt Mask)...
Wednesday, 17 August 2016 - 09:55
DMA documentation for the system bus interface configuration for SIF/DIF
Hello,   I'm working with a E70 device. In the DMA channel configuration register there are two bits called SIF and DIF. They belong to the source/destination of the DMA...
Wednesday, 17 August 2016 - 09:31
UART Comparision on received character in cooperation with DMA
Hello,   I need to receive a stream of characters on the UART1 lines. As soon as a specfic character appears I can start analyse the string so far. So I thought it might be a...
Wednesday, 17 August 2016 - 09:19
AS7 does not load ASF example projects correct
Hello,   I'm fighting with a strange behaviour of AS7 concerning the ASF example projects. If I select one from the corresponding dialog box it will not be loaded into the...
Thursday, 9 June 2016 - 05:12
Checking main clock frequency with CKGR_MCFR register fails
Hello,   I'm using a E70 on a custom board with 16MHz external oscillator. I was just playing around with the clocks and discovered the possibility to check the main clock...
Saturday, 28 May 2016 - 01:23
Problems with 'Erasing entire chip' with AS7.0.943
Hello,   I just upgraded to AS7.0.943 and realized a problem while downloading and using the JLINK EDU interface. It seems this AS Studio mentioned in the subject is not able...
Saturday, 28 May 2016 - 00:29