Type in the full discussion title or a part of it.
Discussion Title Created date
QTouchLib size for ATtiny814/816/817
Hi,   will the ATtiny817 be in the touch configuration of the AtmelStudio with an update? I've seen that it has a PTC and I wondered how big the QTouchLib will be. At...
Monday, 13 February 2017 - 11:27
No touch delta after MAX_ON_DURATION entered
Hi, in my touch I get the maximum value of 1014 if I touch the metal over the button (see stack below). Normally this is no problem and it works good, but if the ...
Wednesday, 11 January 2017 - 10:11
SAMD10C13 too small for QTouchLib?
Hallo,   I need a small and cheap controller for PTC touch buttons and I found the SAMD10C13 which has 12 touch channels (QMatrix). But I'm not sure if the QTouchLib is small...
Thursday, 14 July 2016 - 09:13
Improvement for touch_api_ptc.h: more brackets
I'm using self and mutual capacitance and tried to set the status of the buttons in one for-loop:   for (uint8_t i = 0u; i < (DEF_MUTLCAP_NUM_SENSORS +...
Tuesday, 15 March 2016 - 14:25
Solved: SAMD20 autogenerate QTouch project hangs (sync_config)
Hallo,   I'm on a new project with a SAMD20J18 (own board) and with Atmel Studio 6.2. I created two new QTouch projects with self cap and with mutual cap but it always stops...
Friday, 29 January 2016 - 09:46
Code and Data Memory Considerations at mix-and-match mutual-and self-capacitance sensors
Hallo,   I want to use mix-and-match self and mutual capacitance touch on a SAMD20 or SAMD21 at the same time (self: proximity with long range; mutual: buttons or long...
Wednesday, 28 October 2015 - 11:37