Atmega328P U-TH vs AU Welcome to AVR freaks.
Roger Peralba wrote: This microcontroller doesn't work
Please expand on that:
What, exactly, were you expecting it to do?
What, exactly, is it actually...
Tuesday, 8 February 2022 - 17:58
Read GPS data NMEA format Sbilf22188 wrote: Maybe I can omit the While loop and put data immediately in UDR0 register.
If you do that, you risk overwriting data already in the UDR0 transmit...
9V USB Rechargeable Lithium Ion Battery PP3 (6F22/6LR61) grohote wrote:
Although this is clearly a win for convenience, it must come at the cost of battery capacity?
The charger is going to take up some space, which means the...
Tuesday, 8 February 2022 - 10:33
FTDI FT232RL programming atmega1284p ka7ehk wrote:To program serially, you need a bootloader in the target chip
For the avoidance of doubt, "serially" here means via the UART.
ISP is also serial - but not UART...
Tuesday, 8 February 2022 - 08:50
Replace eeprom DS2431+ with the eeprom DS28E07+ ki0bk wrote:Do the two ROM's have the same address?
david.prentice wrote:The ROM codes are different but you are using "Skip ROM".
ie, the device address ("ROM Code") is not used...
Kreetcha left the thread in 2017 - was it woken by some spam, now removed ? Gone here: https://www.avrfreaks.net/forum/tiny85-pb0-and-pb2-dont-work...
awneil wrote:I would be surprised if it's not possible for Simulink to link to C Sure enough: https://uk.mathworks.com/matlabcentral/answers/321534-how-to-link-c-code-to-...
Razon wrote:, I am using only one Arduino. I have used a pulse to enable two different digital output pins ki0bk wrote:Well that is not what your picture in the OP showed I would...
Note that it is in the very nature of these "higher-level" development systems that you give up control of the fine detail in exchange for rapid development & developer...
Razon wrote:Is there any way by which we can write on a Port similarly from simulink. That's a Simulink question - nothing to do with the AVR or Arduino - so you will...
ki0bk wrote:What's a simulink? A very, very expensive way to develop Arduino code: https://www.mathworks.com/products/simulink.html Razon wrote:when I use simulink for...
Welcome to AVR freaks. Roger Peralba wrote: This microcontroller doesn't work Please expand on that: What, exactly, were you expecting it to do? What, exactly, is it actually...
Sbilf22188 wrote: Maybe I can omit the While loop and put data immediately in UDR0 register. If you do that, you risk overwriting data already in the UDR0 transmit...
david.prentice wrote:I have never used them. It would be interesting to hear from people that have. Indeed. Another question: how long do they take to charge? (...
grohote wrote: Although this is clearly a win for convenience, it must come at the cost of battery capacity? The charger is going to take up some space, which means the...
ka7ehk wrote:To program serially, you need a bootloader in the target chip For the avoidance of doubt, "serially" here means via the UART. ISP is also serial - but not UART...
ki0bk wrote:Do the two ROM's have the same address? david.prentice wrote:The ROM codes are different but you are using "Skip ROM". ie, the device address ("ROM Code") is not used...
Pages