Type in the full discussion title or a part of it.
Discussion Title Created date
ATWINC1500 Problem with HTTPS
Hi, I have a problem with sending data via https. I set port to 443 and turn on TLS.  void http_client_get_config_defaults(struct http_client_config *const config) { config...
Tuesday, 18 July 2017 - 13:46
Code to check NAND Flash (Samsung K9F1G08U0D) on UC3A0512
Hi, I need any example code (read, write any pattern) to check electrically NAND Flash (samsung K9F1G08U0D). I am using AVR32 UC3A0512A processor. I found example code for EVK1104...
Thursday, 11 February 2016 - 17:45
MQTT protocol on AT32UC3 processor
I have problem with publish any MQTT message via Telit GSM GL865 Quad. Firstly I am connecting to test broker (iot.eclipse.org or test.mosquitto.org): AT+CGDCONT=1,"ip...
Friday, 16 October 2015 - 06:04
Timer on pin UC3C1
I have problem with Timer0. I ran it and it works on interrupt but I want to get waveform on pin TC0-A1 (GPIO 54). How can I get it?   void tc_init(volatile avr32_tc_t *tc...
Saturday, 10 October 2015 - 12:32
How to convert FFT Output to int?
I have to do FFT (4096 points) and I need to do some calculations on FFT output values. I used to dsp16_debug_print_complex_vect function to display values, but I need to...
Thursday, 24 September 2015 - 14:54
UC3A0512, UC3C164C and TLV320AIC23 connection.
I have question about connection between UC3A0512, UC3C164C and TLV320AIC23. I want to control TLV registers (for example power control, microphone boost etc.) by UC3C164C...
Tuesday, 1 September 2015 - 16:37
Connection AVR32 UC3A0512 with GSM Telit UL865 through MQTT protocol
Is it possible to connect UC3A0512 with GSM module Telit UL865 (controlled by AT commands) through MQTT Protocol? Anyone has experience with that connection (UC3 - any GSM MQTT)?...
Tuesday, 9 June 2015 - 17:01
AVR32 UC3A0512 MP3 encoder
Is it possible to use UC3A0512 to encoding MP3 files from microphone input and write it to dataflash? Do you have any library to this operation?  
Friday, 17 April 2015 - 11:54
EVK1105 Change bits per sample
I would like to ask you how change bits per sample in Insertion and removal samples code. Default bits_per_sample is 16 bits, but I want to change it to 24 bits. 
Thursday, 9 April 2015 - 13:45
Atmel Studio 6.2 doesn't show all modules in ASF
I am using Atmel Studio 6.2 with ASF 3.21.0. I am working on EVK1105 board (AT32UC3A0512). I need to my project tlv320aic23b codec. I want to add that module through ASF Wizard,...
Tuesday, 3 March 2015 - 23:40
EVK1105 TWI problem RTC DS3231M
I have big problem with RTC DS3231M connected to EVK1105 (AT32UC3A0512). I'm using atmel framework (TWI_Example), but always when I tried write any bytes TWI hangs on: (in...
Friday, 13 February 2015 - 16:11