Type in the full discussion title or a part of it.
Discussion Title Created date
Flag checking in if-statement is setting flag? Xtiny1614 how to check if flag is set
I have been attempting to manually check for a compare interrupt flag in an if-statement but i am only succeeding in setting whichever bit i am attempting to check and then also...
Thu. Jun 21, 2018 - 07:02 AM
AS7 Auto Fuse setting differs from Attiny1614 datasheet (UPDI)
Hello all, I think iv found a mixup in the hex values with the fuse settings for an ATtiny1614 in Atmel studio 7 and what the datasheet says. Datasheet: DS40001893B Fuse settings...
Mon. Jun 18, 2018 - 08:13 PM
ATiny1614 'TCA0_SINGLE.INTFLAGS' Undeclared Compiler error
Hello, In Atmel Studio7 with an Attiny 1614 project, i have found that this: TCA0_SINGLE.INTFLAGS is not recognized as being declared.   When changed to using underscores,...
Fri. Jun 15, 2018 - 03:22 PM
Boot loader Append/Bootend size selection logic (Attiny1614/Xtiny)
How i am reading the Attiny1614 datasheet:   If i set APPEND to '0x10' (16 x 256 bytes) = 4kb of Application code. If i set BOOTEND to '0x01' (1 x 256 bytes) = 256 bytes of...
Thu. May 24, 2018 - 06:16 PM
Atmel ICE tiny wires, cheapness slap to the face.
Finally bought the $130 atmel ice kit. Im sure im not the only person to open the box and and say "WTF". I guess your paying for the software and abilities. But, where are...
Fri. May 11, 2018 - 05:04 PM
Attiny1614 datasheet (Microchip), not easy to navigate vs Old Atmel datasheets
Im working on a project in which we switched from an Atmega328 to the new Attiny1614-1617 from Microchip. Even as a novice iv gotten used to the Atmel datasheets with having the...
Thu. May 10, 2018 - 03:19 PM
LED indicator for software debugging :)
Hello, iv been working on my biggest project ever (600 lines of C' source code) with lots of functions. I have an intermittent problem with program lockup in a certain part of my...
Tue. Mar 13, 2018 - 06:23 PM
BOD speed, size of filter cap on vcc when powering down?
Will BOD save eeprom from corruption without fail or is there a standard filter/charge storage cap value on VCC for added measure when discharging? I read somewhere in the forums...
Mon. Feb 19, 2018 - 04:47 PM
OCR1A (mega168) showing negative signed (int) value in AS7
Doing some += calcs to update 16bit output compare register for an atmeg168 and atmel studio is showing negative values when the OCR register overflows to a positive number only...
Fri. Dec 22, 2017 - 06:06 PM
Do job One; ++; Do job two.. vs multi-tasking + priority tasks
Just working through the multi tasking tutorial again now that i have a project that could potentially use it. Life has flown by the last 3 years since iv really visited coding (...
Fri. May 12, 2017 - 09:11 PM
DAC vcc over-voltage protection on breadboard, use zeners as a safety net
While working with a 12bit DAC  'MCP4821  ($2.37)' which has a 6v max rating and i was isolating the voltage from my AVR/digital power rails with a three pin 5v...
Fri. Apr 28, 2017 - 12:41 AM
Name that 1970's capacitor. Great size and specs.
(On pondering, i have discovered these are axial tantalum capacitors) Hello all, There are these small, black polarized axial capacitors in this 70's Solid state Hammond organ im...
Wed. Jan 18, 2017 - 08:22 PM

Pages