Type in the full discussion title or a part of it.
Discussion Title Created date
Common SMD Parts Kits
I have a nice stock of commonly used through hole resistors, capacitors and leds for prototyping. As I get more involved with doing SMD work I would like to have a similar stock...
Saturday, 13 February 2016 - 12:07
RX/TX voltage and LEDS
I have built a USB to Serial circuit which uses a ch340g chip. I want to add some LEDs to show when the board is receiving or transmitting. I will be the first to admit I suck at...
Sunday, 7 February 2016 - 12:38
SSD1963 TFT Paging
Hi, I have a 480X272 SSD1963 TFT. I attached the data sheet. From what I read, the driver supports paging. I guess my guess my question is; is paging a set reserved section of...
Saturday, 9 January 2016 - 02:34
Atmel-ICE Failed to Enable DW
Hi, I am not sure if this should be in the AS forum or Tools. I am trying to do some debugging with my Atmel ICE with my Arduino UNO, but having little success. I get this error...
Sunday, 3 January 2016 - 13:00
AS7 has bricked my ATMega328P again
Hi,   I was programming my Arduino UNO - Atmega328p with my Atmel-ICE. All was going well (meaning I had successfully programmed it several times) until I received the...
Saturday, 2 January 2016 - 15:54
Configuring USART on SamdD21
Hi,   I am new to ASF and I am trying to get familier with it. I am trying to do a simple Serial USART example on my SAMD21. This example  in the docs gives a step by...
Friday, 1 January 2016 - 14:06
Samd21 Delay functions
Hi, I am getting familiar with my SAMD21G18A (M0 Pro). I've started a new project in AS7. I can't seem to find any delay functions. From what I gathered, there is a delay.h, but I...
Wednesday, 30 December 2015 - 15:24
[SOLVED] Mapping a byte to a 32 bit register
I've been working on improving the speed of my Arduino M0 Pro (SAMD21) TFT project. The pins on a M0 are not a 1 to 1 map to a register like they are on a 8 bit UNO. So setting...
Monday, 28 December 2015 - 14:34
[SOLVED] Configuring port for input - SamD21G18A
Hi, I am trying to get familiar with the SamD21 registers and ports. I am having trouble configuring the port PA14 (e.g. D2 on the M0 Pro) for input (e.g. button press). Set up...
Saturday, 26 December 2015 - 15:53
SAMD21 Verifying Flash...Failed
Hi, I just recently picked up my Atmel-ICE and I am trying to program my Arduino M0 Pro (SAMD21G18A). It seems to program fine but it doesn't verify. I get an error: Verifying...
Friday, 25 December 2015 - 17:11
[SOLVED] SAMD21 Setting Data Direction ports
Hi,   I have a Arduino M0 Pro (SAMd21) and I am want to move away from the Arduino libraries. Where can I find information on how to do simple tasks like set the Data...
Thursday, 24 December 2015 - 15:26
[SOLVED] AS7 cant see AVR Dragon on windows 10
I recently updated to Windows 10. I finally got around to hooking up my Dragon but AS7 doesn't see it. When I look under the Device Manager, I see it under JUNGO. I found this...
Wednesday, 23 December 2015 - 14:13

Pages