Type in the full discussion title or a part of it.
Discussion Title Created date
anyone else see studio 7 stop working fairly often
I was running studio 7.0.634, it will be working and then just die (windows does a report and resets studio) I was hoping build 1005 would help, but it just did the same thing. I...
Mon. Jul 25, 2016 - 11:09 PM
does mega168P have trouble with pin change interrupt on C1?
I am decoding a quadrature hall sensor (allegro A3425). the 2 pins go to 4.7k pullup with .01uF cap to gnd. then they go to pins C1 and C2 on a mega168P (I have not tried it on a...
Sun. Oct 9, 2011 - 08:40 AM
can an ice40 be upgraded into an ice50?
I own an ice40, but need to emulate chips it does not support, so I would like to upgrade it if that is possible. or is my only option to get trace the AVRone? Can the AVRone...
Sat. Jun 11, 2011 - 07:54 AM
anyone else having simulator2 trouble on AS4.19?
I have code that assembles correctly and can simulate ok using simulator "1". but if I try to run simulator2, on each step multiple registers change value, then on the next step,...
Thu. May 19, 2011 - 07:27 AM
anyone ever seen stk500 have no parts available in the list
We recently installed studio on a brand new XP machine (I think studio v4.16 maybe 17) Click on avr studio, then on the program button, it loads up the programmer fine, but then...
Sat. Feb 27, 2010 - 07:51 AM
irrigation valve on DC instead of AC
I have a large irrigation system already wired, and now need to add a few zones (adding more wires is $$). My first idea is to power the valves using DC. Each valve could have a...
Sat. Feb 28, 2009 - 04:43 AM
anyone else having trouble downloading data sheets?
seems like most "complete" data sheets start download and then stall about 1/3 to 1/2 way.
Tue. Feb 24, 2009 - 03:52 AM
choosing the right ceramic resonator
Anyone have a suggestion for a known good low cost 16MHz SMT resonator to work with mega88 series at 5V? We got some Abracon SMT resonators but they only run in low power...
Thu. Dec 11, 2008 - 08:19 AM
outdoor light sensor - seal the box? or not?
I have made a few versions of a sensor that is mounted outside to measure sunlight. http://www.elec-solutions.com/pr... It has an atmel processor inside talking over cat5 wire to...
Wed. Oct 22, 2008 - 04:34 AM
mega88 RC oscillator wrong by a factor of 4?
Has anyone ever seen a mega88 come up with the RC oscillator slow by a factor of 4? At least 99% of the time the product powers up correctly and all is good. But every once in a...
Sat. Aug 16, 2008 - 10:50 AM
tiny44 portA pin5 can't be read?
I am using a Tiny44 and tried to move an input pin to A5. It always reads as low, regardless of the voltage on the pin. I have a simple loop that just copies the state of the pin...
Mon. Jul 16, 2007 - 10:19 AM
tiny44 ADC with 20x gain problem
hardware: .05 ohm resistor from ground to motor lead, other motor lead to power supply. Motor is switched using mechanical relays in H bridge configuration. ATtiny44 in...
Fri. Mar 30, 2007 - 05:23 AM

Pages