Type in the full discussion title or a part of it.
Discussion Title Created date
Hiding //comments
Adding comments to programs is a good point, but finaly there is more text used for comments than for the program itself. Are there C aware editors were showing comments is...
Wed. Sep 5, 2007 - 08:54 PM
itoa() for 8 bits value ?
Hi, I would like to check the voltage level of a 1.5 Volt battery with the ADC function of a Atmega16 ,and send it via the UART to a pc. I have enough with 8 bits, and will not...
Mon. Aug 20, 2007 - 09:52 PM
Laser beam follower
The title is inspired by a "line follower" robot. I would like to steer a small sit-mower that follows a laser beam. ( going towards the source, and the laser does not move) But...
Fri. Aug 10, 2007 - 07:18 PM
Invalid opcode 0xffff at address 0x00000c > What is this
When the yellow arrow points to .org OC1Baddr rjmp timer1_comp edit: fixed the error there thanks to clawson. I have the error message: AVR Simulator: Invalid...
Tue. Aug 7, 2007 - 04:04 PM
Atmega32 operating inside in a car in the sun, clock speed
I would like to use an AVR project in a car, and it has to run even when the care is closed, so it can be hot in the car. When I check the datsheet I found this: Operating...
Tue. Jul 18, 2006 - 03:34 PM
Active noise (sound) surpression.
:?: Hallo all, Does anyone has experience with this: Capture sound with a micophone > amplify > ADC > store and delay > reproduce sound to surpress the unwanted noise. Automatic...
Sun. May 21, 2006 - 11:47 AM
To choose a crystal that maches a baudrate and a RTC
Hi guys, I am wondering if there is an ideal chrystal when the UART and a software RTC is used. ( I mean a RTC based on timer interrupts and not a separate RTC device ) . Thanks
Fri. Apr 14, 2006 - 08:18 PM