Post Created date
[TUT] [C] Newbie's Guide to AVR Timers
Good job. pls tell more on the PWM modes.. thks... again great job.
Mon. Jun 25, 2007 - 03:55 AM
Can Avr output specific voltage ?
thks MegaUSBFreak , yes, it successful, but if i need to change the value of the voltage like from 0.12V to 4.5V, it seems takes time, so the microp cannot react due to slow...
Wed. Jun 20, 2007 - 01:06 AM
Can Avr output specific voltage ?
i found out using the OCR1A can generate different voltage to OC1A by insert different value like OCR1A = 0x3f; but there is no value can generate between 1 V and 3 V. i need to...
Mon. Jun 18, 2007 - 05:41 AM
Can Avr output specific voltage ?
thks for the reply, actually the keypad detect the voltage in row and col, if it is 1.3v in row and 2.2v in col so it will translate the "x" button press. but i have no idea to...
Fri. Jun 15, 2007 - 04:04 AM
Reading Strings from Terminal
this is the code i success to run in 8515 just to share [soft]#include #include #include #define USART_BAUDRATE 9600 #define F_CPU 1000000 #define BAUD_PRESCALE 11//(((F_CPU...
Fri. May 25, 2007 - 08:15 AM
[TUT] [HARD] STK500/GCC AVR Tutorial
thks for the info daqq
Wed. May 23, 2007 - 10:37 AM
[TUT] [SOFT] Using the USART - Serial communications
Hi all, i am using the GCC instead of winavr, it comes out the error of define F_CPU..how do i know what is the value ? or how can i define it ? i am using Atmega8515L ! thks
Wed. May 23, 2007 - 10:36 AM
[TUT] [HARD] STK500/GCC AVR Tutorial
if i want to assign the value of pin E number 3 to pin B number 5 . what should write? "PINB = PINE &_BV(3) " ? so what the value if PINE &_BV(3) will give ?
Wed. May 16, 2007 - 03:51 AM
[TUT] [HARD] STK500/GCC AVR Tutorial
thks for the macro..good luck for the exam!^_^
Wed. May 16, 2007 - 03:23 AM
comparing varibles (code error)
thks for the tips and code. for me it's a BIG relief during my project.. can i repost other problem if i stuck at the code again? anyway thks again! ^_^ :D
Wed. May 16, 2007 - 02:51 AM
[TUT] [HARD] STK500/GCC AVR Tutorial
how to read the specific pin input ...like the second pin of port B. is this "PINB.1" ?
Tue. May 15, 2007 - 09:37 AM