Post Created date
ATmega324PB, How to do power trace layout for two VCC pins on PCB?
short answer... Keep ind "you WANT to keep the bottom layer ground as much as possible. With a 2 layer board it is very hard to keep an entire layer ground.   Keep routing to...
Thursday, 17 June 2021 - 12:59
P-Channel FET Failing in Battery Protection Circuit
Jim,   The OP will most likely have left the building. This thread is revived by a spammer.......  
Tuesday, 15 June 2021 - 05:45
AVR128DB48 TWI 16bit read function
awneil wrote:Don't let Cliff see you saying that ... I have no camera here, not even an office spy cam, so not worried that Cliff would see me saying it ;) Also I do not talk out...
Wednesday, 9 June 2021 - 11:28
AVR128DB48 TWI 16bit read function
ste1n12 wrote: At the End, now it works fine :-)   Then please mark the post that gave the answer as being the solution to your problem, so that in the future others can...
Wednesday, 9 June 2021 - 06:14
Sam4L uart problem
Better move this post to the ARM forum as it for sure is not a AVR32 controller, not to even mention an ancient thread that the original posters have already forgotten long time...
Wednesday, 9 June 2021 - 06:09
Looking For: Voltage (or Current) Limiter
voltage limitation might be easy as that you can do with a simple transistor a zener diode and a resistor.   from the head. take a 847/547 transistor with a 6V1 zener from...
Friday, 21 May 2021 - 09:55
set or clear bit using single push button
Heisen wrote: Time for OP to discover XOR and debounce. with questions like this I always more think time to discover the classroom. I really cannot imagine a teacher not...
Friday, 21 May 2021 - 05:39
TWI slave mode hangs in XMEGA32E5
well, the problem is in line 25 of your senddata routine. Sorry that is all my Chrystal ball is giving as possible error code at the moment.
Thursday, 20 May 2021 - 08:21
Imitation of Sherlock Holmes
js wrote: I have moved the post here. The touch forum doesn't deal with that kind of touch system. I wold just remove this post, first post... only click bait to his youtube...
Tuesday, 18 May 2021 - 07:03
How can make HVPP for Atmega644A-PU Whit Arduino Mega r3 or Atmega328p
Ivan Anistro wrote:i used an atmega 328p whit clock/div8 and tried whitout it   1Mhz and 8mhz, i used pin XTAL 1 and i used Frecuency 32khz to 125khz in usbasp the...
Tuesday, 18 May 2021 - 06:20
AP2204K - how hot is too hot?
unfortunately yes, an LDO on such a massive voltage drop, you either need to draw 0 current, or have one in a massive package that can spread the heat like the TO-220 packages....
Wednesday, 12 May 2021 - 12:35
Most efficient way of analysing 64 bits
little side step... why are you using a PWM controller to do digital outputs? the chip is a 16 channel 12bit PWm controller so for 1 chip you could do with a 16 location uint16...
Wednesday, 12 May 2021 - 10:17

Pages