Type in the full discussion title or a part of it.
Discussion Title Created date
Studio 5 Install problem
Hello, I just installed Studio 5 and get a message: Invalid license data. Reinstall is required. I am installing on to a Windows XP platform running under vmware workstation. I...
Tuesday, 29 March 2011 - 18:26
Jtagice header pins?
I just had my jtagice knocked off the desk by the cat, busted the ribbon cable connector off the probe =(.. Do any of the unpopulated headers carry the same signals as the film...
Monday, 28 February 2011 - 01:45
Header/Adapter board
Is anyone selling an AVR-32 on a simple header board (similar to the Olimex Atmega128 boards)? Now that I finaly have a JtagIce, I might want to play around with one of them....
Tuesday, 26 August 2008 - 18:27
Any fishermen/woman here?
Been playing with a store display of one of these reels: http://fish.shimano.com/publish/... Wondering how one would go about building the electronics for it. I assume you would...
Saturday, 15 March 2008 - 16:44
ADC input question
If I am sampling from a device on a 3.3V bus, using an atmega164 processor, is it better to apply 3.3V to AREF? or use an opamp to bring the analog signal to 5V levels? The device...
Thursday, 18 October 2007 - 19:54
Direct exposure on photosensitive PCB?
Is it possible to build/modify a plotter and reliably expose a PCB directly? I know that plotters are used to expose photo-masks for production PCB runs, are they more sensitive...
Saturday, 22 September 2007 - 17:26
Firmware file for AVRISP?
Does anyone have the firmware file handy to rewind my avrisp back to a version compatible with the open source flash tools? I cant find a link to the old version of Avrstudio...
Wednesday, 5 September 2007 - 22:43
Floating point division alternatives?
Hi, If I need to convert a value in centimeteres to kilometers, normaly I would divide by 100000. With the division mathamatics being so hard on the cpu, is there any benefit to...
Wednesday, 29 August 2007 - 16:31
Newbie question about LCD code
Hi, playing around with a cheap 16x2 LCD, and most of it is working well, except the following bit of code: CMPulse = 10.00; sprintf(tmpString, "%f KM", (double) CMPulse);...
Thursday, 9 August 2007 - 13:57
Newbie questions about AP7000/AP7001
Just a quick question, I have the STK500 and the older ISP programmers for AVR8 bit controllers, and I have seen many plans for DIY programmers... Is there any similar...
Wednesday, 20 June 2007 - 22:43
Power supply for automotive use
Im planning on building a rally computer, and im looking for a robust power supply/filter to use in the car. Input voltage, idealy is 12V, but can be between 7 and 14v depending...
Thursday, 17 May 2007 - 16:28