Type in the full discussion title or a part of it.
Discussion Title Created date
Studio 5 Install problem
Hello, I just installed Studio 5 and get a message: Invalid license data. Reinstall is required. I am installing on to a Windows XP platform running under vmware workstation. I...
Tue. Mar 29, 2011 - 06:26 PM
Jtagice header pins?
I just had my jtagice knocked off the desk by the cat, busted the ribbon cable connector off the probe =(.. Do any of the unpopulated headers carry the same signals as the film...
Mon. Feb 28, 2011 - 01:45 AM
Header/Adapter board
Is anyone selling an AVR-32 on a simple header board (similar to the Olimex Atmega128 boards)? Now that I finaly have a JtagIce, I might want to play around with one of them....
Tue. Aug 26, 2008 - 06:27 PM
Any fishermen/woman here?
Been playing with a store display of one of these reels: http://fish.shimano.com/publish/... Wondering how one would go about building the electronics for it. I assume you would...
Sat. Mar 15, 2008 - 04:44 PM
ADC input question
If I am sampling from a device on a 3.3V bus, using an atmega164 processor, is it better to apply 3.3V to AREF? or use an opamp to bring the analog signal to 5V levels? The device...
Thu. Oct 18, 2007 - 07:54 PM
Direct exposure on photosensitive PCB?
Is it possible to build/modify a plotter and reliably expose a PCB directly? I know that plotters are used to expose photo-masks for production PCB runs, are they more sensitive...
Sat. Sep 22, 2007 - 05:26 PM
Firmware file for AVRISP?
Does anyone have the firmware file handy to rewind my avrisp back to a version compatible with the open source flash tools? I cant find a link to the old version of Avrstudio...
Wed. Sep 5, 2007 - 10:43 PM
Floating point division alternatives?
Hi, If I need to convert a value in centimeteres to kilometers, normaly I would divide by 100000. With the division mathamatics being so hard on the cpu, is there any benefit to...
Wed. Aug 29, 2007 - 04:31 PM
Newbie question about LCD code
Hi, playing around with a cheap 16x2 LCD, and most of it is working well, except the following bit of code: CMPulse = 10.00; sprintf(tmpString, "%f KM", (double) CMPulse);...
Thu. Aug 9, 2007 - 01:57 PM
Newbie questions about AP7000/AP7001
Just a quick question, I have the STK500 and the older ISP programmers for AVR8 bit controllers, and I have seen many plans for DIY programmers... Is there any similar...
Wed. Jun 20, 2007 - 10:43 PM
Power supply for automotive use
Im planning on building a rally computer, and im looking for a robust power supply/filter to use in the car. Input voltage, idealy is 12V, but can be between 7 and 14v depending...
Thu. May 17, 2007 - 04:28 PM