Type in the full discussion title or a part of it.
Discussion Title Created date
Clamp on DC current logger
Hey all,        I am looking through all the usual suspects, and I thought I would ask here as well.   I am looking for a DC current logger for...
Tuesday, 2 July 2019 - 02:19
Series vs Parallel Kw/Hr
SAY WHAT?!!     One of my best friends is of the belief that running high power machines one after the other for the same interval each time,  uses less...
Tuesday, 25 June 2019 - 18:42
Crimper search - Classified Unobtanium
Fellow Freakers, I am in search of the following crimping tool:   https://www.molex.com/molex/prod...   It has been classified obsolete and there is no apparent...
Wednesday, 24 April 2019 - 02:17
This is pointed more towards the IDE developers than the general public,   While experimenting with the XMEGA USART and Atmel START I noticed that Printf can be...
Sunday, 21 April 2019 - 04:08
Greets Freaks,   I used Atmel START to set up an example project for USART C and START defaults PC6 and PC7 for the USART RXD and TXD pins.   I set everything up,...
Sunday, 21 April 2019 - 03:57
Link To Alank2 Programmer Software
Sunday, 14 April 2019 - 04:00
Alank2 autoprogrammer issues
Hey all, I have a couple of Alank2's programmers and I seem to be having trouble with getting the V1 unit working with Windows10 and version 1.10d of the software.   I have...
Sunday, 14 April 2019 - 03:07
7 Segment LED Nixie/Numitron Tubes IV-11
Hey all,   My son wants to build this clock for his play room:   https://www.banggood.com/DIY-NB-...   THing is, I have been reading that most of the time the...
Saturday, 23 March 2019 - 22:35
Timer Interrupt on XMEGA32e5
Back at it again.   Sooooo I have a simple little test program that I am trying to get running, with little success.  MAybe someone here can give me the mental goose I...
Friday, 22 March 2019 - 03:57
24 Channel PWM LED Driver give away
Jims cleaning house again.   I have 92 TLC5947DAP from Texas Instruments sitting in two tubes that I have no use for.   Datasheet: http://www.ti.com/lit/ds/symlink......
Friday, 22 March 2019 - 03:19
SAMD20 Timer setup using START
Now that the PORTS have been pretty much figured out, time to get on the timers.  After reading about the timers in the datasheet I elected to modify my test project and add...
Wednesday, 20 March 2019 - 03:02
Simple D20 Pin Toggle Not So Simple
Back again.   THis time I am just looking to blink an LED.  So I fired up Atmel Start and used all the defaults and named the first 8 pins of PORTB 'MY_PORT_x" where 'x...
Monday, 18 March 2019 - 04:16