Type in the full discussion title or a part of it.
Discussion Title Created date
Link To Alank2 Programmer Software
Sunday, 14 April 2019 - 04:00
Alank2 autoprogrammer issues
Hey all, I have a couple of Alank2's programmers and I seem to be having trouble with getting the V1 unit working with Windows10 and version 1.10d of the software.   I have...
Sunday, 14 April 2019 - 03:07
7 Segment LED Nixie/Numitron Tubes IV-11
Hey all,   My son wants to build this clock for his play room:   https://www.banggood.com/DIY-NB-...   THing is, I have been reading that most of the time the...
Saturday, 23 March 2019 - 22:35
Timer Interrupt on XMEGA32e5
Back at it again.   Sooooo I have a simple little test program that I am trying to get running, with little success.  MAybe someone here can give me the mental goose I...
Friday, 22 March 2019 - 03:57
24 Channel PWM LED Driver give away
Jims cleaning house again.   I have 92 TLC5947DAP from Texas Instruments sitting in two tubes that I have no use for.   Datasheet: http://www.ti.com/lit/ds/symlink......
Friday, 22 March 2019 - 03:19
SAMD20 Timer setup using START
Now that the PORTS have been pretty much figured out, time to get on the timers.  After reading about the timers in the datasheet I elected to modify my test project and add...
Wednesday, 20 March 2019 - 03:02
Simple D20 Pin Toggle Not So Simple
Back again.   THis time I am just looking to blink an LED.  So I fired up Atmel Start and used all the defaults and named the first 8 pins of PORTB 'MY_PORT_x" where 'x...
Monday, 18 March 2019 - 04:16
Peripheral to Peripheral DMA on Xmega32e5
Greets Freaks!   As I continue my exploration of this family of AVR's I came across the EDMA and I see it allows for Peripheral to Peripheral transfers.  I actually have...
Monday, 18 March 2019 - 01:49
What does this do.....?
In a thread in the XMEGA forum I put up a program that I cobbled together from some code I found on the internet.   There is one line in there I do not understand and it is...
Saturday, 9 March 2019 - 02:04
Source of crosstalk help......
I cannot find the spot in the signal flow where the crosstalk between channels is happening......   Maybe here?   Anybody?   JIm
Sunday, 3 March 2019 - 02:31
Blew a fuse, and then blew a fuse
After many, many years I accidentally blew the fuse in my Fluke 117 multimeter.  No biggie I think, just open the case and find out what I need to order, or pick up locally...
Wednesday, 27 February 2019 - 18:18
using LSS output in ASM project
Hey all,   This thread is a splinter from this one: https://www.avrfreaks.net/forum/...   In that thread a solution was had to get the LED to blink based on the '...
Thursday, 14 February 2019 - 16:58