Post Created date
Atmel Lightweight Mesh stack
Alex: There is any performance or benchmark tests for lwmesh?
Tuesday, 16 October 2012 - 02:12
Have XMega pins the clamp diode?
Quote:Dear Customer Thank you for contacting Atmel Technical. All GPIO pins and RESET pin have internal clamp diodes as in AVR Mega devices. Best Regards, Shakkeer Muhammed Atmel...
Tuesday, 30 August 2011 - 18:20
Xmega ADC internal temperature sensor problems
electronic.designer wrote:Reference = internal Vcc/1.6 (Vcc= 3.3V) The calibration value in the signature row according to the AN AVR1300 was measured using the 1.0V reference so...
Friday, 4 March 2011 - 18:02
Xmega ADC internal temperature sensor problems
hooverphonique wrote:One thing eludes me, though.. Are the adc values specified by atmel (000 at 0K, CAL at 85C) the actual unsigned adc value or the values after subtracting the...
Friday, 4 March 2011 - 17:59
AVR Enigma
You can´t read the signature, but Can you reprogam the fuses?
Tuesday, 7 April 2009 - 17:56
DiodeDan wrote:I checked Digi Key, they list them, but say that they have none in stock. Now what I found really interesting is that the more powerful XMEGAs were cheaper than...
Monday, 4 August 2008 - 23:41
bad magic number ?
Ok, you can choose between two options: 1- After you finish all the building update u-boot with the new one (I don't have a clue how to do it because I don't have the jtag, try...
Monday, 14 July 2008 - 21:37
Oops: Kernel access of bad area, sig: 11 [#1]
The problem is gcc 4.2.2-atmel-1.0.8-1 at the hardy repository. You must build a new toolchain using v2.2.0-rc4 (section "release...
Monday, 14 July 2008 - 21:27
bad magic number ?
Your uImage was generated using the mkimage of u-boot 1.3.2?
Monday, 14 July 2008 - 06:03
bad magic number ?
I experienced the two problems, the bad magic number and the big kernel. When my kernel is too big I can upload it by tftp without any problems, after the bootm the kernel has...
Friday, 11 July 2008 - 16:39
Oops: Kernel access of bad area, sig: 11 [#1]
without buildroot, just download the patched kernel and build it using the new toolchain.More info at
Monday, 7 July 2008 - 04:09
SD Card is driving me mental!
Don't use a divider, use a open collector buffer like 7407 with pull up to 3.3, that would solve your problem
Sunday, 6 July 2008 - 05:06