Type in the full discussion title or a part of it.
Discussion Title Created date
Loading a .hex file into a C program for AVR
Hi All, I am building a small programming system to program a bunch of modules populated on a panel. Each module can receive its program over UART when it is in DFU mode. So what...
Thu. Apr 10, 2014 - 02:07 AM
.DB Problem
Hi all, I am having a strange issue with .DB in Atmel Studio 6. It says syntax error when I hover my mouse cursor over the .DB directive when simulating using the AVR simulator....
Wed. Nov 13, 2013 - 02:01 AM
Extended Sleep & Watchdog Timer - Immediate Reset Upon S
Hi All, I am having some issues with my watchdog timer. Basically, I have the WDT enabled to prevent a freeze or "crash", which works fine. But then, when my system is put to...
Thu. Mar 7, 2013 - 08:53 PM
TWIM Not Writing to Correct Address twi_master_write
Hi All, finally got the TWIM up and running on my UC3L064. However, cannot seem to get writing to work, been at it for hours. The TWIM module initializes, and performs a write to...
Wed. Oct 17, 2012 - 08:00 PM
TWIM on UC3L0
Hi All, having a lot of trouble getting the TWIM to run on my UC3L0. I have only a single device connected on the bus with 2.2K pull ups on SDA and SCL. I have checked the GPIO...
Thu. Oct 11, 2012 - 08:43 PM
PWMA works on PORTA but not on PORTB
Hi All. Please excuse me if this is a simple question, I am very new to AVR32. I have an AVR32 AT32UC3L0 running on a custom board and am trying to setup the PWMA controller to...
Mon. Oct 8, 2012 - 09:27 PM
Minimum Power Consumption on Brown Out
Hi All, I have an issue where my system is running from a LiPoly battery with a protection circuit. When the battery voltage drops too low I need the system to draw minimum power...
Wed. Aug 15, 2012 - 04:12 PM
SleepMode Issues, Hi current and Oscillator Still Running
Hi All, I am having some difficult getting my AVRs power consumption low when in sleep mode. Unfortunately, this is a finished board I was given so I cannot test every other...
Wed. Aug 1, 2012 - 09:44 PM
USB Certification
Hi All, I am designing a device based on a USB AVR. I was wondering if anyone knows what needs to be done in order to sell a USB device. Is there a certification process that...
Wed. Apr 25, 2012 - 11:46 AM
Changing CPU clock initial config of WT-12 over UART and USB
Hi All, I have an interesting problem related to achieving specific UART baud rates. I am interfacing to a blue-giga WT-12 bluetooth module over UART and also using the USB...
Fri. Apr 6, 2012 - 12:15 AM
AVR Studio 5.1 wont compile for device registers (AT90USB128
Hi All, Im working with a fresh copy of AVR Studio 5.1, new project for AVR GCC with device AT90USB1287. When I try to set things in code like UBBRHL0 or any register like that, I...
Fri. Feb 24, 2012 - 06:20 PM
AVR ONE! Wont Work - AVR Studio 5.1 - Help Please!
Hi All, I'm working with an AVR ONE with the latest firmware and AVR Studio 5.1 downloaded this morning. I ran the self test on the AVR One and it passed. I cannot program a...
Wed. Feb 22, 2012 - 06:47 PM

Pages