Post Created date
Capacitors for TOSC pins on AT90USB1286 w/ 32.768kHz Crystal
Quote:Firstly,do I need external capacitors? I have used TOSC pins with no caps on several models (including AT90USB1287). I believe this is what Atmel recommend. Have noticed...
Friday, 11 May 2012 - 09:11
Problem in accessing Memory Card through MicroSD Adapter
If you're familiar with the program inside mega32 you can change the code to simulate card data and send that to MAX232.
Friday, 11 May 2012 - 09:01
Two questions regarding analog comparator
The alternate port function for PE2 is Analog Comparator Positive Input (surprise??!!). Someone with a bigger brain than me maybe can explain why 1.85V is the "normal" value to be...
Thursday, 10 May 2012 - 18:24
Two questions regarding analog comparator
Quote:Does that mean that the PORTF and the "JTAG Pins target device" is basicly the same port? Could I connect the "stk600 JTAG programmer signal" to the PORTF instead? No, only...
Wednesday, 9 May 2012 - 19:54
Two questions regarding analog comparator
Never used 128RFA1, does it possibly have JTAG pins on PORTE? If so disable JTAG fuse.
Wednesday, 9 May 2012 - 18:08
Problem with input
This sound as a suspicious JTAG issue, those pins are used i.e. for mega164. Disable JTAG fuse and see if that helps.
Wednesday, 9 May 2012 - 17:54
Two questions regarding analog comparator
I'm pretty sure MBedder want you to use either a 1K pot or a 2K pot and sweep it from end to end.
Wednesday, 9 May 2012 - 13:43
Really weird counter glitch
in Temp, TCNT0 out TCNT0, Temp out PortB, Temp maybe should be in Temp, TCNT0 out PortB, Temp Which would load the value of TCNT0 on PortB.
Wednesday, 9 May 2012 - 13:39
Really weird counter glitch
Btw, writing comments is an essential part of writing code. As it look now, no one else but you have a clue what you really want to happen in that code line.
Wednesday, 9 May 2012 - 13:35
Really weird counter glitch
You're actually loading the SRAM address for TCNT0 into Temp doing this problem: ldi Temp, TCNT0 Don't know what number you intend to load into Temp, but probably not SRAM...
Wednesday, 9 May 2012 - 13:32
Problem in accessing Memory Card through MicroSD Adapter
Quote:I have not used the MICROSD module connector, but instead of that I have soldered pins on the adapter and fixed it in the Bredboard. Then its connections are done according...
Tuesday, 8 May 2012 - 19:52
RS485 -> USB adapter
I thank you both for your assuring answers.
Tuesday, 8 May 2012 - 14:31