Post Created date
ATmega8_Getting started-need kind help
You have already been adviced NOT to use AVRStudio 5 since it's still buggy. Is there a reason not to use 4.19?
Monday, 12 December 2011 - 12:48
pin change interrupts on attiny2313
The only way to have inputs set low is to connect external pull-downs resistors. Setting PORTx to 0 disables the internal pull-up resistors and if nothing is connected to those...
Monday, 12 December 2011 - 12:35
"File not found" error amongst AVR mnemonics
Quote:BTW if you turn out to be beamrider/small-weiner and are trolling I will be VERY upset I wasted time bothering to investigate/answer!Getting a bit paranoid, are we? I'll...
Saturday, 10 December 2011 - 22:31
spi slave code
So now you're using real chips and not Proteus? Have you set /SS pin on SPI Master as output(or high input)? If not the chip will leave Master mode and enter Slave mode.
Saturday, 10 December 2011 - 22:22
Beginner Question [programming Arduino with Asm]
And maybe some .asm to be found here
Saturday, 10 December 2011 - 20:30
Beginner Question [programming Arduino with Asm]
Quote:If you any other things like that, please let me know!Well no, not anything graphic like that but the normal advice is to look at this site for .asm examples: http://www....
Saturday, 10 December 2011 - 20:24
How to force compiler to use hard multiplication for mega128
The hardware multiplier is 8 bits x 8 bits with 16 bit result placed in r0 and r1.
Saturday, 10 December 2011 - 19:46
spi slave code
So these are not real chips but simulated stuff in Proteus. Sorry my friend, I cannot help you. I do not use Proteus and any setting in that program can be causing your problem.
Saturday, 10 December 2011 - 19:24
spi slave code
If you don't have a scope or probe you can connect MOSI to MISO on Master chip and see if you receive what you send.
Saturday, 10 December 2011 - 18:51
spi slave code
Quote:Google translation sucks Sure does, but I think I guessed the meaning of it anyway, except "simulation". Are these real chips or just simulation in PC? Please try to answer...
Saturday, 10 December 2011 - 18:47
spi slave code
Google interpret this to:Quote:not receive the data sent by the master to perform the simulation should change d port status and I have them connected to each teacher with the...
Saturday, 10 December 2011 - 18:34
spi slave code
This might be an interesting thread. My Spanish is non-existing. Google translates your text to:Quote: and followed the examples in the datasheet and set the master fck/16 and...
Saturday, 10 December 2011 - 18:24