Post Created date
Loading integers into EEPROM from CSV file.
1) Always post the toolchain and MCU you're using( also clk source and frequency ), in your OP. 2) Get the entire string into the MCU, then begin to parse it. 3) Study the strtok...
Wed. Jan 23, 2019 - 09:02 AM
attiny85 wake from sleep on falling edge trouble
From power down mode, only an external level intr on INT0 or pin change intr can wake the MCU ( as far as pin wakeup sources ). You can use the PCI on the same pin, instead of...
Tue. Jan 22, 2019 - 04:08 AM
ATxmega128A1U - ADC & DMA Redux
Try this:
Sun. Feb 25, 2018 - 06:38 AM
I'll eat my hat if...
I'd add that posting such a small section of your code makes it almost impossible for anybody to understand what's going on ( just so you know, for any future code postings ). Did...
Wed. Oct 11, 2017 - 04:50 AM
No frills XMEGA sample code for newbies
@Mark, I'm glad to be of service.     Jerome
Wed. Aug 17, 2016 - 06:37 AM
SPID STATUS not working. Help please.
You have to put something in the SPID_data register, for it to work. Check out AVR1309 on Atmel's site under 8 bit MCUs ( Xmega ). There's really only rare cases when asm would...
Wed. Aug 17, 2016 - 06:10 AM
Interrupts on Xmega
When you post about software questions, ALWAYS list the toolchain, and chip you're using, . WHICH Xmega are you using and what problem do you have ? I suggest learning C ......
Thu. Jun 23, 2016 - 09:04 PM
ADC referense for XMEGA.
Hello Doc.   AFE = Analog Front End. Basically any circuitry, inc. cables/probes, leading up to the ADC input. Ok, I found the 3 wire/color cable set on Sparkfun, thank you...
Sun. Jun 12, 2016 - 06:27 AM
ADC referense for XMEGA.
DOCJC, where did you get your EKG AFE ( pads, etc ) from ( maybe you built it from scratch... ) ?
Sat. Jun 11, 2016 - 11:10 PM
ATXMEGA128A3U Clock settings
I can't find any code example. Xmegas have many AppNotes and code examples on the Atmel site. Look for AVR1506.
Thu. Mar 17, 2016 - 11:00 PM
Software MP3 decoder for ATmega/ATxmega
Yes, real-time. Thank you ( for the links, too ).
Wed. Mar 9, 2016 - 06:19 PM
Problem with SD card / FatFs on SAMV71 Xplained Ultra
These sound like speeds using SPI, am I wrong ? I'd be surprised if your ARM uC didn't have 4 bit SD I/F, but if those speeds ARE for the 4 bit I/F...( ??!!? )
Wed. Mar 9, 2016 - 01:48 AM