Post Created date
Newest Flip good on Win10/64?
Here are my experiences from using Flip 3.4.7.112 on a brand-new Win10/64 installation (evaluation build 18272):   Device manager finds Other devices: AT32UC3A3 DFU but finds...
Tuesday, 13 November 2018 - 10:30
Newest Flip good on Win10/64?
Actually, it is only as good as the USB driver. For the longest time, Flip only came with 32-bit drivers, and a lot of hand-holding at that.    A 64-bit driver with...
Monday, 12 November 2018 - 20:38
Low-power sleep
... above code must replace /1000 by /2000 to acount for prescaler causing freq/=2^(n+1) where n=0   Timed it for 30s and it was spot on.  
Wednesday, 1 August 2018 - 11:29
Low-power sleep
Whey, we have working code!   Not yet tested on oscilloscope and ampmeter, but seemingly very close to desired 1Hz blink rate.    Børge   #define...
Wednesday, 1 August 2018 - 11:21
Low-power sleep
I have found both a SLEEP() macro and the function pm_configure_clocks() in the code base. Unfortunately, it doesn't seem that the 115kHz RC oscillator is a valid choice...
Tuesday, 31 July 2018 - 13:33
Low-power sleep
OK, thanks!   Børge
Tuesday, 31 July 2018 - 10:06
Low-power sleep
Hi Mike,    Thanks a lot for your help! I'm using the AT32UC3A3256.    This code will run right after reset, while clocks are still slow. Do you know if...
Tuesday, 31 July 2018 - 06:36
Can someone point me to a download link for latest FLIP?
Thank you!   I will test it on a bare Win7 computer tonight. Meanwhile I'm trying to communicate with Atmel/Microchip.    John's file is good according to Windows...
Thursday, 11 January 2018 - 08:51
Is SSC busted? Details of I2S struggles
The ssc_i2s_init code which is called is below.    Are you aware of  ssc->cr = txen_mask | rxen_mask;having to be called after the varios pdca inits?  ...
Saturday, 10 June 2017 - 10:32
UC3 I2S output starts with random LRCK
I was able to trace things a bit further, and I believe it is the onset of pdca_enable(PDCA_CHANNEL_SSC_TX); and friends which must be timed to the polarity of LRCK. ...
Tuesday, 6 June 2017 - 07:18
UC3 PDCA documentation
Got it from Atmel:   http://www.atmel.com/images/doc3...
Wednesday, 1 February 2017 - 19:43
USB C and OTG
It may seem wrong, but it is entirely allowed. It will not be hard to find products that are USB 2.0 devices with USB C receptacles.   I've been reading up a little on this...
Tuesday, 27 September 2016 - 19:52

Pages