Type in the full discussion title or a part of it.
Discussion Title Created date
[ASF4] Minor config changes (claim to) update many files
Why do fairly trivial changes to an Atmel Start project result in such a large number of updated files on the Project Summary page?  How do I tell which ones have actually...
Wednesday, 6 March 2019 - 14:39
SPI Mode CPHA Reversal
Chasing down an ADC issue has sent me into a SPI rabbit hole, and my current status is that the Clock Phase seems to do the opposite of what it should be doing.  My Setup:...
Thursday, 29 November 2018 - 22:44
Programmed Board Won't Work Until After a Debug Session
I have a bit of a head scratcher here.  I'm using a SAMG55 on a custom board and programming it with an Atmel-ICE programmer.  The board will program and verify fine,...
Tuesday, 25 September 2018 - 03:10
TWI Clear/Reset and SMBus options [SAMG55]
I've found the datasheet to be a bit lacking on a few TWI related things, and I'm hoping you folks can help fill in the gaps.    First off, what exactly happens on the...
Monday, 17 September 2018 - 16:00
SMBUS on SAMG55
After running into some issues sharing my I2C bus with SMBUS based devices, and having the extra pins available, I've decided to add a dedicated SMBUS to the next revision of my...
Friday, 15 June 2018 - 20:34
Debug Jumping to Hard Fault Handler and Hanging
I had a previous thread about some debug issues here: https://community.atmel.com/foru...   Most of that was resolved by fixing a PLL configuration error, but I am still...
Wednesday, 13 June 2018 - 13:59
Strange behavior with debug
I'm dealing with some really odd behavior and hoping that someone can help me figure out what is going on here.  I'm using the SAMG55 Xplained board and attempting to...
Monday, 4 June 2018 - 22:48
Linker Error when porting to AS from IAR
I'm trying to port a chunk of vendor code to Atmel Studio from IAR, and while I have finally sorted out the include paths and made it past all of the compile errors. I'm now stuck...
Thursday, 31 May 2018 - 19:24
SAMG55 UHP / OHCI Registers
I'm working with a vendor to implement their USB host stack on the SAMG55, and I'm a bit confused as to how the memory mapping works for the UHP/OHCI registers.  Example code...
Thursday, 19 April 2018 - 15:43
ARM Specific UART Library
I've made use of Peter Fleury's wonderful UART library on AVR based projects, and I was wondering if something similar existed for Atmel's ARM based processors.  If so,...
Tuesday, 16 January 2018 - 14:50
Atmel ICE debugger changing flash bytes
This is on a SAM G55 I spent an inordinate amount of time tonight trying to get the CRCCU module working in a bootloader so that I could check the validity of an APP before...
Thursday, 11 January 2018 - 01:53
USB Host MSC, FAT_FS, and HUBs
I have the USB Host MSC example code running fine, but have a couple questions:   1. What is the proper way to see if a USB drive is present?  The example does this:...
Thursday, 4 January 2018 - 16:07

Pages