Post Created date
Initializing an array
Arcanist wrote: I have tried with the latest Atmel studio, I then uninstalled everything atmel from my PC and installed version 7.709 with the same results.   The newest...
Saturday, 11 November 2017 - 20:54
Getting (Re)started with AVR - Initializing Peripherals
Network wrote: Indeed, to get things started my default has been to assume the peripherals default off, though we all know about assuming. ;-)   Any reset and the reset at...
Monday, 6 November 2017 - 20:34
ADC Sampling Rate Limit
jahana wrote: I know that the MAX crystal for this chip is 16MHz. Also, by changing the fuse bits I have activated the external crystal.   The internal and external...
Saturday, 30 September 2017 - 21:51
SOLVED: debugWire with PLL works, not with 20 MHz crystal
gergelytakacs wrote: The cap unfortunately did not help, I had a 100 nF Polyester one lying around to try.   The cap is always important even if it doesn't SEEM to help, you...
Thursday, 28 September 2017 - 01:34
Fail to read Device Signature, unable to enter programming mode
stevenbulmer wrote:   I currently have a 10k pullup on RESET with a switch to ground and not entering program mode.     That might be too much of a load for the...
Saturday, 2 September 2017 - 21:34
ATMEGA328PB --not avail (again)
avrcandies wrote: Wonder why doesn't the ATMEGA168PB have 5 timers?...would be nice if the 44/88/168/328PB family all had the same features....That has probably been a "...
Saturday, 15 July 2017 - 20:12
Detecting crystal frequency in firmware
theusch wrote: Wasn't there a problem with that model and 20MHz and USART?  Y'all with younger memories will have to help.   I may not have a younger memory but... I...
Thursday, 13 July 2017 - 00:49
Atmel Studio 7.0 and 6.1 on same computer?
japes_jr wrote: Now I am getting a new error.   failed to connect mplabcom_invalid_handle   Strange, mplab is used for PIC chips.  
Saturday, 1 July 2017 - 18:18
Atmel Studio 7.0.1416/7.0.1417
lordraven wrote:   I have a AVR ISP MK2 Programmer. .. In AS the Tools list stay empty, no Programmer, no Simulator. Target is a ATtiny2313A. .. Any Ideas?    ...
Saturday, 17 June 2017 - 17:27
intel Hex file structure question
Kartman wrote: Luckily I was just a tad late to the game and managed to avoid such technology. The TRS80 had cassette storage.   TRS80 was my first as well. Cassette then...
Wednesday, 7 June 2017 - 05:35
intel Hex file structure question
theusch wrote: ...I see no gap.   That's true it is a split! I had to leave quickly and didn't post the other AS7 FatFs project using a m328p with -O1. It's also a split....
Wednesday, 7 June 2017 - 01:00
intel Hex file structure question
I have two FatFs projects one on a m328p and another on a xmegaE5 using AS7.   Here is the E5 at -O1, when using Os it doesn't have the code gap. This case is a little...
Tuesday, 6 June 2017 - 22:01

Pages