Type in the full discussion title or a part of it.
Discussion Title Created date
[ATmega128RFA1] High deep-sleep currnet consumption?
Hi everyone, I've been making a prototype based on a MEGA128RFA1 ('built-in' radio) and the last prototype worked fine on current consumption. That one used a ceramic antenna, a...
Monday, 9 November 2015 - 12:41
ATmega128RFA1, RTC crystal won't start.
[EDIT: Old title "ATmega128RFA1 won't wake from deep-sleep using SymbolCounter."]   Ok, I'm totally confused. I'm using ATmega128RFA1 as a microcontroller, sending it to deep...
Tuesday, 9 June 2015 - 21:18
Is there a known effect in microcontrollers for working a 'little' beyond the absolute maximum voltage as power supply?
Yes, the question is a little too wide. right now I'm using an ATmega128RFA1 microcontroller whose power supply is rated to be 3.6V max.   I did some test with some boards...
Friday, 10 October 2014 - 13:59
Another one with trouble doing shifting in 32bit variable.
My question is either How to make it work or Why doesn't it work. My code: uint32_t Lmin, Lmax, Vmin; while(1){ Lmax = (2UL<<16UL) | (0xAA<<8) | 0xA8...
Thursday, 14 August 2014 - 15:54
[ATmega128RFA1] How to maximize wireless range?
I've been designing a prototipe with an ATmega128RFA1 chip and in the latest wireless communication tests I've done I'm able to separate two nodes between 4 to 8 meters before...
Monday, 14 July 2014 - 17:41
[SOLVED] Help ADXL001, output not changing
UPDATE: Forget it, I was doing the most stupid thing, was measuring it when fliping in the none-sensing axis. And I'm stuck again. I have a bunch of ADXL001 acelerometers which I...
Thursday, 3 July 2014 - 15:40
¿AVR MKII ISP triggering the short circuit protection?
I've got myself a new PCB with a ATmega128RFA1 and managed to program the µc a couple of times, but now for some reason I cant get to read the device signature. I'm using an AVR...
Monday, 23 June 2014 - 20:44
[ATmega128RFA1] What's the symbol counter clock?
I want to put the mcu to deep-sleep and then wake it up some time later. The datasheet says the clock source can be the RTC crystal, which is 32.768kHz, so I would expect that the...
Friday, 23 May 2014 - 16:46
ATmega128RFA1 - Max ADC Voltage Input?
According to the datasheet and this post, for single ended input, the maximum voltage reference is AVDD which is internally generated to ~1.8V My problem is that I want to measure...
Tuesday, 13 May 2014 - 15:05
Supercapacitor disconnected by software? Possible & Usef
Hi all, I recently got an idea/problem concerning the use of supercapacitor and battery. I have a system wich will be powered by a high capacity battery. Its capacity is dependent...
Monday, 12 May 2014 - 18:49
[ATmega128RFA1] PinChange Interrupt not working [SOLVED]
Ok, so I've been trying to make this interrupt work on a ATmega128RFA1 without success. I'm using PORT B4 and B5, which are PCINT4 and PCINT5 respectively. I have enabled the PC...
Wednesday, 5 February 2014 - 21:58