Type in the full discussion title or a part of it.
Discussion Title Created date
Convincing START to include ccsbcs.c for fatfs LFN
(My personal choice is to use Atmel START when possible rather than fight against it, but...)   I'm using Atmel START to create a project that includes FATFS.  I've...
Friday, 25 June 2021 - 13:49
External oscillator in START not selected?
NOTE: I am intentionally mis-posting this!  It belongs in the AVRFREAKS forum, not in ARM, but I can't log into the avrfreaks forum.  So hopefully an admin will move it...
Wednesday, 9 June 2021 - 15:14
Incorporating external source code directories into an AS7 project
I'm running Microchip Studio V 7.0.2542 on Windows 10.   I'd like to create a project that incorporates .c and .h files from several external directories.  What is the "...
Saturday, 8 May 2021 - 21:34
Excess current consumption: warning (and solution)
I recently tracked down a source of excess current in hibernation and wanted to pass along what I learned.   TL;DR: If you leave a hardware module initialized (e.g. SERCOM),...
Wednesday, 17 February 2021 - 19:47
SAMD11 Hanging waiting for OSC32KRDY
Short form: My SAMD11 / ASF4 / Atmel START project code is hanging on startup at: #if CONF_OSC32K_CONFIG == 1 #if CONF_OSC32K_ENABLE == 1 while (!...
Tuesday, 9 February 2021 - 17:10
AtmetStart.env_conf already exists in the zip archive
Problem: Can't update Atmel START project after re-configuring Atmel START project   Symptom: Upon clicking Generate Project => Project Summary [OK] it pops up this window...
Monday, 8 February 2021 - 05:23
How to cleanly shutdown WINC1500 during m2m_wifi_connect()
I'm using ASF4 to drive a WINC1500 in STA mode.   I have code that times out if the call to m2m_wifi_connect() doesn't return soon enough (i.e. the AP hasn't responded)....
Thursday, 4 February 2021 - 23:56
Sending contiguous bytes via SERCOM
All I want is to send a contiguous byte stream via SERCOM with a 2.5MHz bit rate.  Am I asking too much?     (See also https://community.atmel.com/foru...
Thursday, 4 February 2021 - 15:35
large inter-byte delay in spi_m_sync_transfer?
Short form: I'm trying to send a packet of three bytes via SPI using spi_m_sync_transfer().  I'm seeing a 100 uSec gap between each byte. is this to be expected? what...
Thursday, 4 February 2021 - 00:45
Micro Trace Buffer setup question...
File under "just curious" but...   In Atmel Microchip Studio 7, when you first enable Program Counter Trace, a helpful dialog pops up telling you how to enable the Micro...
Wednesday, 3 February 2021 - 17:17
WINC1500: send() more than 1 MTU (1400 bytes)
For the WINC1500, SOCKET_BUFFER_MAX_LENGTH defines the Maximum Transmission Unit (MTU) to be 1400 bytes.    Assuming I've got an open socket in the WINC and I need to...
Monday, 25 January 2021 - 18:18
PC sampling in AS7?
I'm trying to enable PC sampling for a SAME54 as described here:      http://atmel-studio-doc.s3-websi...   I can bring up the Program Counter Trace window,...
Tuesday, 12 January 2021 - 18:54

Pages