Post Created date
What value is this capacitor?
triden wrote:My dad gave me this data sheet for diagnosing an ignition problem on a GM truck (he's a mechanic). He was wondering if I had a cap that would work which I do, but......
Wednesday, 5 June 2013 - 05:24
what is the better Preamplifier for Electret Mic
@ganbayar This is one we used in our FYP(SSL) because of cheap and fast solution. And for literature Review: Google[ManyEars]...
Thursday, 9 May 2013 - 12:04
xMega128D3 TWI Communication
RohitD wrote: void cpu_init(void) { /* Setting controller pins as INPUT AND OUTPUT */ sysclk_init(); delay_ms(200); PMIC.CTRL |= PMIC_LOLVLEN_bm ; PMIC.CTRL...
Monday, 1 April 2013 - 13:49
xMega128D3 TWI Communication
RohitD wrote:Yes I have pulled up both the lines cpu_init(); Definition of above function?
Monday, 1 April 2013 - 04:39
Monitor Serial 15 pin male repair
ksatyaki wrote:I have the following situation now: I have an old monitor from which the 15 pin cable cannot be plugged out. It comes out of the monitor and the end is a normal 15...
Saturday, 30 March 2013 - 04:39
Help me IR Protocol Panasonic A75C3623
vrcomstudio wrote:I have remote control panasonic A75C3623 want read protocol IR i get IR protocol panasonic in http://electromotiveforces.blogs... but not same template IR...
Monday, 25 March 2013 - 11:01
Diode to allow powering from battery or usb
jerseyguy1996 wrote:So really, incorporating the advice of both of you, does this look right? 3.3V_REG_SCH by jg1996business, on Flickr Before proceeding towards PCB, it would be...
Monday, 25 March 2013 - 07:46
Help: Floppy Drive emulator with network connection
fabio0008 wrote:Let's say we have an embroidery machine. It has a floppy drive. And reads files from that floppy drive. What i want to do is from a Local computer(Central)send...
Thursday, 21 March 2013 - 09:22
Diode to allow powering from battery or usb
Halakatevakis wrote:Have a look at: Great for me but not for jerseyguy1996 MCP73837 != MCP73831t
Tuesday, 19 March 2013 - 07:24
Diode to allow powering from battery or usb
jerseyguy1996 wrote:I would like to make it so that when it is not plugged into a 5V usb power source the circuit will run off of the battery, but when it is plugged into the USB...
Tuesday, 19 March 2013 - 05:52
AVR32UC3A3 Xplained and SDRAM
Hobbycoder wrote: Has someone a hint to a website explaining the basics or is such a kind guy to explain it to me? I already used the forum search and google. If i am not wrong...
Tuesday, 19 March 2013 - 04:54
Atmel Studio 6, bitcloud to program Zigduino and Sparkfun b.
alexru wrote:Software wise both AS6 and AS5 are supported. I don't know if usbasp supports programming of mega128rfa1, it probably should. Now i am confident to learn bitcloud,...
Tuesday, 19 March 2013 - 03:26