Post Created date
Where is the definition of "_stack_size" used in linker script?
Thanks for given pointers, I got the correct direction where to keep investigating:   You are right, turns out that it is a value hardcoded in the GNU Linker binary.  ...
Wednesday, 10 August 2016 - 16:23
Where is the definition of "_stack_size" used in linker script?
Not really; as I said, I did a "search in files" to the word "_stack_size" (and also "stack_size") would have appeared as a result if it was present in any of the build files (so...
Tuesday, 9 August 2016 - 13:04
[SOFT] [C] AVRGCC: Monitoring Stack Usage
Good news: I've been able to run the code and it works perfectly. The not so good news are that, to do so, I had to manually edit one of the start-up files which get automatically...
Sunday, 12 June 2016 - 23:05
[SOFT] [C] AVRGCC: Monitoring Stack Usage
The original post didn't include all the relevant info, but it is included in the attached files. In the .c file, there is a comment saying so: Fill the stack space with a known...
Sunday, 12 June 2016 - 22:25
[SOFT] [C] AVRGCC: Monitoring Stack Usage
Hello,   could someone help me in translating the ASM code for the AVR32? The opcodes are not the same, and while I have a clear understanding of the memory model, my...
Saturday, 11 June 2016 - 19:47
PDCA for TWI in AT32UC3A series
I know I'm replying to a 4 years old thread... but there aren't really a lot of conversations about I2C / TWI with DMA / PDCA around here, and I was about to ask exactly the same...
Tuesday, 15 March 2016 - 23:08
Dreaded I2C bus stuck LOW, even with basic Atmel example projects
Hi, I use 0x3F because I was unlucky enough that my preferred address of choice (0x50) collided with some I2C sensors a while back. So started using this since then. 0x3F was...
Tuesday, 15 March 2016 - 22:26
Dreaded I2C bus stuck LOW, even with basic Atmel example projects
Of course,   Here is shown the state of the Master (3V3) and the Slave (5V) PCBs when the I2C bus gets stuck and both boards are connected:       Later,...
Tuesday, 15 March 2016 - 16:50
Latest Atmel Studio broke my build (?)
je_ruud wrote: One solution is to install the 7.0.594 version of the part pack in in the 7.0.790 installation. You can have several versions of a part pack installed in parallel....
Wednesday, 9 March 2016 - 22:27
Latest Atmel Studio broke my build (?)
je_ruud wrote: AS 7.0.790 contains a newer version of the part pack than AS 7.0.594. Unfortunately if you copy a project from 7.0.594 to 7.0.790 there is no mechanism to...
Wednesday, 9 March 2016 - 21:48
Extremely simple code leads to GCC error: "unrecognizable insn"
Bingo600 wrote: You can't use avr-gcc (for the AVR line of 8-bit MCU's) , as a replacement for avr32-gcc (for the UC3's and other avr32 MCU's)   It seems now so obvious...
Sunday, 13 December 2015 - 22:56
Any good I2C / TWI driver for AVR32 UC3?
Not really, I just posted a comment on the bug report, and that's why it appears updated on this date. Actually, the last update before mine was a similar comment from 2014 by...
Thursday, 12 November 2015 - 12:12

Pages