Type in the full discussion title or a part of it.
Discussion Title Created date
makefile access to path error
Why do I get this error every once in a while when I do a rebuild all in AS7.  I have to go in and delete makefile.mk by hand and then it builds fine.  It is sort...
Tuesday, 18 July 2017 - 16:25
extern vs. volatile
I am ready for  some abuse now.  I have an int I  define as volatile in two files in my AtmelStudio 7 project.  It seems to work.  Is the correct way to...
Monday, 17 July 2017 - 16:10
What is ASF in Atmel Studio all about?
What do I use ASF for.  I have never used it, and I noticed it is an option in the VS7 installation.  I chose it, but it probably just makes the installation bigger....
Sunday, 11 June 2017 - 21:37
AS7 _delay_ms appears in italics
I just installed AS7, and when I convert an AS6.2 project over to AS7 I notice that all of my calls to _delay_ms() appear in an italic font, different from the font for the rest...
Friday, 9 June 2017 - 23:14
installing GNU Scientific Library
Has anyone installed the GNU Scientific Library for use in a C project in Atmel Studio?  I need to invert a 6x6 matrix.  Any hints would be welcomed.
Sunday, 21 May 2017 - 18:00
Nuts & Volts LED photometer
Hi Guys, There is an article in the new Nuts & Volts that describes using LEDs as photometers.  It is based on a Forrest Mims article that states that the LED will...
Friday, 7 April 2017 - 20:16
ATmega328 thermal reset
Hi Guys,   I have an LED lamp I built using an ATmega328 to drive the rest of the circuit that gets pretty warm from the surrounding LEDs and other components when...
Friday, 31 March 2017 - 17:01
ISP - SPI resistors
Hello Gentlemen and Gentlewomen,   I am using the SPI bus to load data to an external device that uses the MOSI and SCK pins, and I am using the 6 ISP pins for my programmer...
Saturday, 17 December 2016 - 20:24
AVR to ARM threads
Can some nice person point me to threads discussing changing from AVR to ARM.  I am thinking it might be time for me to learn how to use an ARM, and I always have a hard time...
Friday, 2 December 2016 - 17:27
Why is BOOTSZ 2048 in a virgin ATmega328?
I don't understand why the BOOTSZ is set to 2048 and the BOOTRST fuse unchecked in a virgin ATmega328.  I would think I would want the BOOTSZ to be as small as possible to...
Wednesday, 7 September 2016 - 17:47
disabling interrupts inside an ISR
I am throwing an interrupt every 100 clock cycles on Timer0.  I am doing something inside the ISR that may take more than 100 cycles to complete.  Am I asking for ...
Thursday, 18 August 2016 - 18:20
touch screen stylus
I have a Winbook that has a touch screen and I have a stylus that doesn't work very well.  As the touch screen is capacitive, is there something I can do to the stylus, like...
Thursday, 7 April 2016 - 00:13

Pages