Post Created date
XMEGA Family is Losing in the Popularity Polls
I'm a great fan of the ATXMEGA range and wait for the day when USB OTG is provided. Sad to say, but  if Microchip loose interest in the ATXMEGA range, then when the IP period...
Wed. Aug 22, 2018 - 05:07 PM
USB peripheral connected to ATXMEGA
My ears twitched when I read you advice about not discounting the venerable 1287 as I've just spent some frustrating hours trying to get all the info on the SAM21DJ. The 'full'...
Tue. Sep 19, 2017 - 10:10 AM
USB peripheral connected to ATXMEGA
I accept the point about the 'U' in USB, but the fact is that if one is designing a product hardwired to a known peripheral (scanner, say), the the whole edifice of the USB...
Mon. Sep 18, 2017 - 01:28 PM
USB peripheral connected to ATXMEGA
3 years in 68 is not that long! Seriously, I had a product working nicely with very low power using the AT90USB1287 as OTG host all written in assembler with the general system...
Mon. Sep 18, 2017 - 01:05 PM
USB peripheral connected to ATXMEGA
Finally conceded that I have to go to the ATSAMD21J18A to get USB host functionality on a more modern chip than the AT90USB1287. As you are so well regarded re your USB...
Mon. Sep 18, 2017 - 12:22 PM
Future of XMEGA
Any news - XMEGA never seems to get a mention these days?
Wed. Sep 13, 2017 - 03:05 PM
Future of XMEGA
Has anyone got an update on this thread? Still hoping for an ATXMEGA with OTG USB!
Tue. May 30, 2017 - 07:36 AM
talking to USB XMEGA device from Windows via COM port
awneil wrote: jalbinson wrote:Adding another chip adds the milliamps and that is bad news. Eh?? If you're connected to USB you have loads of power to play with!!   Not so...
Fri. Apr 21, 2017 - 06:45 PM
talking to USB XMEGA device from Windows via COM port
gchapman wrote: It [VID, PID] is not so bad.   http://fourwalledcubicle.com/blog/2010/03/obtaining-a-vid-and-pid/ http://wiki.openmoko.org/wiki/USB_Product_IDs http://blog....
Fri. Apr 21, 2017 - 03:15 PM
talking to USB XMEGA device from Windows via COM port
DocJC wrote:     I do not have a vendor ID or product ID; can I use any value in the enumeration   For a commercial product: No, you have to get your own numbers...
Fri. Apr 21, 2017 - 07:14 AM
talking to USB XMEGA device from Windows via COM port
Simonetta wrote: Simonetta wrote:   If it takes 20 hours of study and 10 hours of debugging/testing to get the internal USB peripheral of a microcontroller to work, and one...
Fri. Apr 21, 2017 - 07:10 AM
talking to USB XMEGA device from Windows via COM port
gchapman wrote: jalbinson wrote:I know I will appear old fashioned, but after getting a barcode scanner  to successfully talk to an AT90USB1287 working in host mode (all...
Fri. Apr 21, 2017 - 06:59 AM

Pages