Type in the full discussion title or a part of it.
Discussion Title Created date
Unknown Board message with SAMC21 Xplained Pro connected
AS6.2, ASF 3.27 How can fix this so that the board is known?   I have installed the SAMC20/C21 pack, and when I choose the device to be SAMC the Examples for SAMC21 appear on...
Thursday, 17 September 2015 - 02:40
conf_clock.h is different in different Examples (ASF3.27)
I am trying to learn how to program SAMC21 Xplained Pro.   I found that the conf_clock.h file is different between the two examples: GETTING-STARTED and CAN_QUICK_START....
Thursday, 17 September 2015 - 00:21
The SAMC21 Xplained runs at 4MHz.  I would like to change to 48MHz if possible.   Does anyone have an example of changing the OSC48M to 48MHz?  
Wednesday, 16 September 2015 - 01:23
When will ASF 3.27 be available to AS6.2?
On the Atmel ASF page ASF 3.27 is available for download,but doesn't update AS6.2.  Any Idea when it will be available?  
Monday, 14 September 2015 - 04:29
Optimized away my counter.
Atmel Studio, started new C project. Target ATmega328 P Xplained Mini.  My counter "cnt" was optimized away. Solved by making cnt a volatile.     
Thursday, 3 September 2015 - 10:45
Problem with Atmega16U2 USB2Serial code
Refer to the last 20 or so comments to:   [TUT] [SOFT] Using the USART - Interrupt driven serial comms    For example: 115200 baud fails on an Arduino UNO, Nano and...
Friday, 2 January 2015 - 08:25
[TUT][code] unsigned multiply for the ATTiny, assembly
Routines for multiplying unsigned values by a constant. Here is how to make assembly routines suitable for the ATTiny with no multiply instruction. Included are some example...
Friday, 27 September 2013 - 16:30
(solved)AS6sp2 Stimulator off by one line while debugging
I deleted all empty lines in the comment section at the beginning. This fixed the problem. As I mentioned below, 4.19 simulator worked correctly with the same file (I copied the...
Friday, 20 September 2013 - 11:25
Can't see EEPROM string in simulator
I have defined a string in the ESEG: ... .eseg message: .db "what is the method?",13,10 ... I cannot see this string in the eeprom EEPROM memory section while debugging with the...
Tuesday, 17 September 2013 - 12:39
Unable to upgrade JTAGICE3 with AS6 SP2
I had previously, upgraded to version 3 automatically when installing AS6 SP2. Had some issues and downgraded to JTAGICE3 version 2.15. Now after reinstall of AS6 SP2, I am...
Wednesday, 11 September 2013 - 23:17
[TUT][CODE] USART receive & transmit interrupt routine,G
Attached is full code that runs on Arduino Mega2560. 1. Setup registers. USART3 is wired to the Adafruit Ultimate GPS. USART0 connects to my PC via USB cli ; disable...
Saturday, 7 September 2013 - 08:16
Simulator not working in AS6.1 SP2
And I thought it was only the JTAGICE3. I can build, but when trying to debug I get an error message. "Unable to start your debug session"
Friday, 6 September 2013 - 10:04