Post Created date
temperature demo on raven/contiki
Quote: Run wireshark to capture packets on that interface. Enter 'r' in the jackdaw menu to report raw packets, then boot the raven. The jackdaw should report the startup raven...
Tuesday, 8 January 2013 - 21:42
temperature demo on raven/contiki
Thanks for the link. I copied the file dak RAVENUSB_RNDIS_64bit.inf into NotePad++ and saved it as that filename. It installed into the USB stick and the Devices and Printers...
Monday, 7 January 2013 - 20:54
temperature demo on raven/contiki
Quote:It is a composite device and should enumerate as both an RNDIS network interface and the COM port. Check the device manager for a ? device and point to the rndis inf file...
Monday, 7 January 2013 - 18:47
temperature demo on raven/contiki
Thanks for your help. I installed wireshark on WIN_7.64 bit, then opened the Capture Interfaces dialog and took a screencapture, as shown below. The jackdaw is not listed. I...
Sunday, 6 January 2013 - 16:48
temperature demo on raven/contiki
OK, I checked the Windows driver and found it needed to be re-installed. When I plug-in the jackdaw it now enums as COM8. I opened a serial port monitor and setup 9600,8,n,1. The...
Sunday, 6 January 2013 - 04:16
temperature demo on raven/contiki
Thanks for your rapid reply! Maybe the VMware captured the usb stick and didn't show up. I need to close that to let Win7 capture it. I'll try, again.
Saturday, 5 January 2013 - 00:26
Loading Instant Contiki 2.6 on ravens & jackdaw usb
I've been working on this and found that to build the mote, use Cooja then use AVR Studio 6 to download the firmware into the Raven. Lots to learn on this. Thanks
Monday, 31 December 2012 - 04:15
Loading Instant Contiki 2.6 on ravens & jackdaw usb
Thanks for your reply, DAK! Is it proper to use AVR Studio for this or Eclipse inside Instant Contiki?
Thursday, 20 December 2012 - 20:21
HVP on studio 6 with Dragon prog'g
Thanks for your reply. This URL has the dragon HVPP connector pinout. [url] [/url] This is what I used to wire up to the 328P. Since the...
Wednesday, 24 October 2012 - 19:18
zigbit slave to Xmega-A3BU Xplained bd.
"You probably can write transparent bridge on ZigBit, that will pass everything on to the radio, but I'm not sure if it will work." Thanks for your reply, Alex! My application is...
Thursday, 18 October 2012 - 21:42
[solved] ZigBit WSNMonitor is not working on my Win7 64bit
I have tried running WSN Monitor on WIN7_64 bit with XP SP3 compatibility enabled. The Monitor starts up OK. The jackdaw enums OK and I get the COM#_. When I enter the COM# into...
Saturday, 13 October 2012 - 23:26
Atmel Lightweight Mesh stack
LwMesh might be a good topic for the Atmel Tech. on Tour series. What is the possibility of that happening?
Tuesday, 9 October 2012 - 03:28