Type in the full discussion title or a part of it.
Discussion Title Created date
Analog comparator manual errors
XMEGA AU manual Analog comparator STATUS register  
Tue. Oct 3, 2017 - 07:06 AM
DMAC: Manual errors Sat. Oct 15, 2016 - 10:27 AM
Parts with mapped flash to data space
From AVR instruction set manual:   In some parts the Flash Memory has been mapped to the data space and can be read using this command (LD, ...) This property is present for...
Wed. Oct 15, 2014 - 07:03 AM
A note on XMEGA frequency generation mode
Based on my experiments, it may be useful to know that channel A is the complement of channel B ( ,C and D if exist) when the TC is configured in frequency generation mode (A3U -...
Wed. Sep 10, 2014 - 03:27 PM
128MHz frequency on port pin
As we know, CLKper4 can be appeared on some port pins (except A series) and the maximum allowable frequency for this clock is 128MHz. Also according to datasheets, the typical pin...
Mon. Dec 16, 2013 - 09:52 AM
Headache due to Atmel answers
I asked a question from Atmel support: Quote:Accoring to ATXMEGA128A1 datasheet, SDRAM start address (base address) can be from 0x4000. Also the maximum SDRAM size is written 16MB...
Thu. Aug 8, 2013 - 12:44 PM
My XMEGA based electronic organ
I have designed and implemented an electronic organ by using XMEGA microcontroller and a secondhand keyboard which is obtained from an out of service organ. 10 simultaneous notes...
Fri. Aug 2, 2013 - 10:58 AM
Direct connection from 5v LCD to XMEGA
I connected a 128x64 ks108 based lcd to XMEGA with 5v supply for lcd and 3.3v for XMEGA. There is a read function in lcd library, which reads data from lcd to microcontroller....
Sun. Nov 25, 2012 - 10:25 AM
XMEGA new informations from Atmel support
I asked about slew rate value for XMEGA port pins. The Atmel answer contains some new information, which is not present in XMEGA manuals and datasheets. Quote:The effect of the...
Tue. Jul 5, 2011 - 08:09 AM
When does atmel modify XMEGA document errors?
I am writing a book on XMEGA and atmel documents are the only reference for me. These documents are full of mistakes and errors and I have reported tens of errors to atmel. But...
Sun. Jun 19, 2011 - 02:07 PM
IR2175 current sensor
The IR2175 is a monolithic current sensing IC designed for motor drive applications. The output is a pwm signal and current measurement can be done from pwm duty cycle calculation...
Sat. Apr 30, 2011 - 09:32 AM
Major bug found in XMEGA waveform generation
I found a hardware bug in XMEGA timer, When I was writing a sample code for activation of single slope PWM. I wrote to atmel: Quote:There is problem in single slope PWM waveform...
Thu. Mar 24, 2011 - 11:19 AM

Pages