Type in the full discussion title or a part of it.
Discussion Title Created date
DSU calc the CRC 32 only in the lower part of flash?
Hello,   I working with the SAMC21 and the DSU an have the Problem, that the calc of the CRC32 only work's in the lower part of the Flash.   #define BOOTLOADER_addr...
Fri. Dec 14, 2018 - 08:20 AM
How the DSU does work?
Hello,   I'm testing the SAMC21 and want to use the internal DSU do calc a CRC32 Checksum over a part of the internal Flash.   As I can see the DSU has it's Clock...
Thu. Dec 13, 2018 - 06:30 PM
Application Offset when there a bootloader should be in Front
Hello together,   I have a Question, to to Change the Offset of the application when I'm working with the ASF 3.38.   I found there in the ASF\sam0\utils\linker_scripts\...
Tue. Dec 11, 2018 - 10:36 AM
gcc compiler error / ASF error???
I have a Problem with the Atmel Studio 7.0.1931 when I make a Project with Atmel SAMC21 with 256 kB Flash and using the ASF 3.38.0 to get the NVM Driver of the ASF.  ...
Fri. Nov 16, 2018 - 12:45 PM
How to set fuse with atprogram.exe
Hello,   I know my question sounds stupid, but I have there a Problem to Setup the fuse in the rigth way without stop the Interface working.   I use the AVRISPmk2 and...
Thu. Nov 9, 2017 - 11:05 AM
ATXmega128A4-U PDI Interface don't work
Hello,   This is the first time I work with an Xmega device, so may be that I misunderstand some things with the PDI Interface. The last 5 years I have worked with Atmega and...
Thu. Oct 19, 2017 - 05:16 AM
Pack Manager Download breaks
Hello,   I have a Problem when I want to open an older Project with an Xmega inside in the Atmel Studio 7.0.1417. The Problem is that this project needs a download of the...
Thu. Oct 12, 2017 - 05:15 AM
Does ASF only support big CPU?
I'm using AVR Studio 5 with the ASF integrated and wondering about the support for normal AVRmega CPU's. May be it possible that there are not really drivers or modules for the...
Mon. Jan 30, 2012 - 08:57 AM
How to use the avrlib of WINAVR?
Hello there, I have a problem which i don't understand, because it should work but it doesn't. I have installed WinAVR-20090306rc1-install.exe and then I run the installs...
Thu. May 12, 2011 - 11:49 AM
Where do you buy your AVR's?
Hello, I have an easy question, but for me it's very important. Where do you buy your AVR's? I found ATmega64L-8AU on the "propox.com" shop for about 5,97 EUR / Piece and 3,07 EUR...
Tue. Aug 25, 2009 - 08:04 AM
ISP Programming and using the SPI?
Hello, I think I have a simple question, but at the moment I have no idea if it works. :? So my problem is, that I want to use the ATmega8 in a project, but the problem is that I...
Wed. Aug 19, 2009 - 08:38 PM