Post Created date
Bitcloud Link Key
You don't need link keys to make a device join a specific network. All you need is to specify an extended PAN ID of the network.   Getting to 200 devices is not easy, but...
Friday, 25 September 2015 - 21:48
Yes, all the digital logic is clocked from 16 MHz crystal. And I think it will be even worse in real life.
Friday, 25 September 2015 - 15:29
There is no way to use that delay for location. At the very best it would be synchronous with 16 MHz clock.   RF233 has ranging engine, but it is poorly documented and the...
Thursday, 24 September 2015 - 22:22
Lw-Mesh - "broken frames"
Documented what? The stack is using extended operating mode, which is documented in the datasheet for the radio.   There are no other CRCs applied apart from the one...
Thursday, 24 September 2015 - 22:18
ATZB-256RFR2-XPRO as Zigbee Sniffer
There is no firmware for it to be a sniffer.   I have a simple sniffer that just dumps the frames into the serial port in ASCII and there is also description for the...
Thursday, 24 September 2015 - 02:49
SAMR21 as WSN Monitor Interface
Yep, that will be a better way. Who knows what runs on that stick.
Wednesday, 23 September 2015 - 23:58
SAMR21 as WSN Monitor Interface
I don't think there is any stick from Atmel that comes with anything compatible with WSN Monitor. So you really need to provide more information.
Wednesday, 23 September 2015 - 06:17
SAMR21 as WSN Monitor Interface
nets wrote:But, will re-try now. That would be helpful.   nets wrote:I have a functional network, WSN-Monitor works with AVR RZ USBSTICK. There is no support for RZ USBSTICK...
Wednesday, 23 September 2015 - 05:58
LW mesh 500 nodes?
Nope. There was never any documentation for it. The feature was basically implemented in my spare time. It was either push it out without any documentation and let people have the...
Wednesday, 23 September 2015 - 05:56
LW mesh 500 nodes?
Earlier versions (up to v1.1.1) had an OTAU implementation for AVR devices only. It was removed in anticipation for a better implementation, but that never happened.   ...
Wednesday, 23 September 2015 - 03:13
SAMR21 as WSN Monitor Interface
A lot of people did. First of all, what stack are you using? And what have you tried and what does not work?
Wednesday, 23 September 2015 - 00:33
LW mesh 500 nodes?
Yes it is possible. The rest depends on how much data you want to put through this network. With a pure star topology it is actually rather easy and straightforward.
Tuesday, 22 September 2015 - 16:13