Type in the full discussion title or a part of it.
Discussion Title Created date
Tiny24 timer0 in normal mode problem
I've used the timer in other modes but wanted to just get a basic timer interrupt going using the timer in normal mode and use the overflow interrupt to do it but can't see the...
Sun. Mar 8, 2009 - 09:58 PM
TQFP100 for stk600
Don't know if this is of any value. http://avnetexpress.avnet.com/st...
Wed. Feb 25, 2009 - 01:02 AM
Tiny261 pin definitions
I'm getting ready to play (no pay) with the 261(can be set to run at 16MHz using the PLL without an external clock-more speed Scotty) and was looking at the pins and it seems they...
Wed. Feb 18, 2009 - 03:14 AM
DB101 - AVR483
Ok, I decided to try a little 'C'ode work with the DB101 and downloaded the IAR Kickstart and AVR483 from Atmel. AVR 483 mentions a code package that's available(pg11 of AVR483)...
Mon. Dec 31, 2007 - 12:22 AM
Holding a Dragon
Since the Dragon has no holes for mounting,I took some rubber grommets and a few screws (could be machine for thru holes or wood for going into wood)and used a washer between the...
Sat. May 19, 2007 - 03:50 AM
Dragon does AT90USBKey thru JTAG
The latest update of Studio now allows the Dragon to work as a programming tool (not debug)through the JTAG interface on the Key's JTAG port . The (hack)cable in the picture is...
Sun. Mar 4, 2007 - 04:43 AM
AVRISP MKII -digikey
Just checked digikey and they have about 240 MKII's in stock. Have fun! Pete
Thu. May 4, 2006 - 09:52 PM
AVRISP MKII at Digikey
Spotted some mkII 's at digikey if anyone is interseted . Pete
Wed. Apr 12, 2006 - 12:47 AM
MKII can not do
Got a avrispMKII this week and installed everything fine . Hooked it up and made sure the correct avr was set and read the signature . Fine, it worked and then read the fuses -...
Sat. Mar 18, 2006 - 11:27 PM
mega48 Timer0 and pwm
Hi Made time over the holidays to do some tinkering on a mega48. Set up a adc with a simple 10Kpot and a small program( as found here ) and got it putting out values to a...
Fri. Dec 30, 2005 - 01:02 AM