Type in the full discussion title or a part of it.
Discussion Title Created date
multiple power supplies for AVR project
My AVR is connected to 3 pressure sensors on the Analog inputs. the sensors report 0 - 5 volts. The AVR is powered by a LDO 5v regulator and the sensors are powered by their own 5...
Thursday, 18 March 2010 - 02:48
MEGA1280 Data sheet, something I'm not understanding
The data sheet for the MEGA 1280 states that there are 12 PWM pins, Table 3-1 page 7. However, after rading the Port discriptions, there are 15 pwm pins. Port B = 4 Port E = 3...
Friday, 12 March 2010 - 15:11
Eagel File needed
Looking for the ATMEGA1280 eagle file. Thanks
Wednesday, 10 March 2010 - 17:20
Touch Screens: Suggestions, Recommendation, Opinions wanted
I'm getting into Visual interfacing with my AVR projects and I am selecting a Touch screen to prototype with. So far I have narrowed it down to 2 different ones that are within my...
Thursday, 22 October 2009 - 16:28
Splitting Serial
How can I split a serial TX line. What I want to do is connnect one AVR to a PC, but also send the TX from that AVR to the RX on another. Can I simply split it? Can't be that...
Thursday, 3 September 2009 - 02:27
Reading voltage
I want to us use an Analog input pin on an AVR to read a voltage from 0 to 30 volts. I'm thinking I will divide the incoming voltage equally 6 times to give me 0-5 volts to...
Thursday, 27 August 2009 - 19:21