Post Created date
Solder Fumes
They are obviously aliens, they don't have flesh.
Wednesday, 3 June 2020 - 02:40
Solder Fumes
Years ago we used to solder 2 wires on lamp holders for traffic lights (around 250,000 of them...), lots of fumes.   So I built a fume extractor with a 240V fan similar to a...
Tuesday, 2 June 2020 - 21:53
19:13:42: [ERROR] Unexpected signature 0x00000102 (expected 0x001e9502)., ModuleName: TCF (TCF command: Device:startSession failed.)
Jerome the thread is 5 years old, I will lock this thread.   Please start a new thread and tell us a bit more about your circuit (a diagram would be nice) and whether the...
Tuesday, 2 June 2020 - 21:43
AVR PIN 5V to 3.3V
oops..
Tuesday, 2 June 2020 - 04:26
AVR PIN 5V to 3.3V
A lot of noise about nothing! Just replace the cap (C12) with a 3k3 resistor and R25 to 1.8K "Et voila"  a 5V to 3.3V divider.
Monday, 1 June 2020 - 21:46
Waiting for pin to go high
I have been doing so much 6502 assembly lately Lucky YOU!! It's as nice as 6800 (or 68HC11) code. Sooo relaxing.
Monday, 1 June 2020 - 00:57
Waiting for pin to go high
Maybe try ! (the ~ maybe expecting all of portb to be low?? but I'm not the brightest C guy around ) while (!( PINB & KBD_CLK )) {}
Sunday, 31 May 2020 - 22:22
Waiting for pin to go high
How can a binary number ( 0b00000008 ) have an 8 in it?   A binary number is only made up of 0s and 1s.
Sunday, 31 May 2020 - 22:11
ADC problem! Accelerometer signals
I don't see any connection with a Studio problem here, moving to the AVR forum.
Friday, 29 May 2020 - 21:14
avr uart string receive and compare
I don't see any connection with a Studio problem here, moving to the AVR forum.
Friday, 29 May 2020 - 21:12
ATMEL ICE and Series 1 Tiny via UPDI issues.
those burn-through mark Any parts underneath?
Friday, 29 May 2020 - 03:36
Relay module 74HC595 Q0 sometimes on
A 100uF being charged or discharged by a BC337 is likely to kill the transistor eventually. There is no need for the cap at all.
Wednesday, 27 May 2020 - 23:53

Pages