Post Created date
Mega 2560 pin failure
Great carpentry work!
Wednesday, 27 May 2020 - 21:43
ATMEL ICE and Series 1 Tiny via UPDI issues.
5.02v and clean on scope Are you reading this at the point where the ICE is plugged in? I would use a multimeter anyway at those 2 pins.
Wednesday, 27 May 2020 - 05:06
How make HEX file for attiny402 using winavr
Now, what should I do? Download and install AS7 with the latest device packs, winavr is too old.
Wednesday, 27 May 2020 - 04:55
right timings for DHT11
  Use the Orange button, I have split your post into a new thread.    
Wednesday, 27 May 2020 - 02:40
"Hire A Freelancer" websites. Anyone used one?
All of them people taking up cheap contracts come here for help and want us to do their work anyway.
Tuesday, 26 May 2020 - 22:09
AVRISPMKII/Studio4.19 and Windows 10
AVR Studio is more for Windows XP than Windows 7 Huh? 
Tuesday, 26 May 2020 - 21:57
Off to a rough start... AVR128DA48
I finally wrote (mostly copied) my first C program Congratulations, see you are more than just a pretty face....
Tuesday, 26 May 2020 - 21:52
Cannot enter programming mode on ATmega16U2
Updated screen shot above and downloaded new datasheet.   Is it possible for to post what the actual fuses are set at now?
Tuesday, 26 May 2020 - 01:05
Cannot enter programming mode on ATmega16U2
    Are you referring to the default 0x5E value for the low fuse in table 25.5? Because even that would be problematic as it clearly shows the CKDIV8 bit programmed...
Monday, 25 May 2020 - 22:52
ATtiny85 flash memory unknown usage
And why or why is this in the ARM forum?? Moving to AVR.
Monday, 25 May 2020 - 22:30
Cannot enter programming mode on ATmega16U2
Sorry guys, I still can't see where the datasheet shows the default fuse value as being set for external crystal   Only table 25.5 point 2 says 2. The default setting of...
Monday, 25 May 2020 - 22:16
Virus in Studio??
Interesting however the warning popped up as soon as I plugged in the JTAG and did the firmware update.   It shows that's the mchpwinusbdevice.exe file so I gave it an...
Monday, 25 May 2020 - 07:09