Post Created date
RC-5 decoder code in GCC
Quote:What kind of stuff did you need to do to make it work? All the remote controls I had did not have symmetrical pulses IIRC the high were different width of the lows so the...
Thursday, 1 September 2005 - 03:35
Tool for calculates instruction time
Hmmm I thought there was an option where you could show the number of cycles used with the assembler but it does not seem to be there, must be another company's device I'm...
Wednesday, 31 August 2005 - 22:10
RC-5 decoder code in GCC
Quote:His version is in C. And I hope it works much better than the one in the Atmel app note. I needed to do lot's of work on it to make it work.
Wednesday, 31 August 2005 - 22:06
Saving Data from UART in Non-Vol Memory
Quote: used a HC11 previously so decided to try something new. Welcome away from the darkside :-) You will find lots of people here who are ex HC11 users. Quote: i need to be able...
Wednesday, 31 August 2005 - 22:02
OC1Aaddr vector does nothing
Quote:direct jump, why?) RJMP (relative jump) can only go 2k either way, JMP can go anywhere in memory and is used in larger chips. Nice trap :-) I now copy all the vectors...
Monday, 29 August 2005 - 21:58
OC1Aaddr vector does nothing
Quote:rjmp end_sync_pulse Are you sure your chips uses RJMP in the vector and not JMP?
Monday, 29 August 2005 - 21:39
Not supported by the device
Quote:Could it be that you have something set wrong so that the assembler "thinks" it is generating code for such a small device and therefore won't recognise CALL? Good point! I...
Friday, 26 August 2005 - 20:43
Difference between official AVRISP and homebrew
It does Quote:"just bloody work", :-) If everything is correct. To start don't use anything else to talk to the programmer but AVRprog, make sure you have the programmer powered...
Friday, 26 August 2005 - 20:35
newbie looking for info on how to get started with WinAVR
Quote: in a box under a dead squirrel in my garage. Which I presume you shot as target practice :-)
Friday, 26 August 2005 - 07:38
Assembler manual?
Or you can use the Help menu in Studio. Possibly not as good as the other pointers but of some help.
Friday, 26 August 2005 - 07:27
what is the best baud rate for a 2313 clocked at 10Mhz?
Remember that you need to connect the RTS/CTS and DSR/DTR lines (or disable them in Windows' settings) or you computer will not send any data out. Check out the connections for a...
Friday, 26 August 2005 - 07:24
Not supported by the device
Quote:I'm using version 4.10.356 So it's no problem? That would be the AVR Studio version (4.11 with SP3 is current with 4.12 pending). You can choose either version 1 of the...
Friday, 26 August 2005 - 07:04

Pages