Post Created date
Programs required to program ATmega328p on Arduino Uno using Assembly Language
Complete madness and no respect for the people who design debuggers, both hardware and software, their children will be starving to  death.
Thursday, 6 June 2019 - 21:58
Programs required to program ATmega328p on Arduino Uno using Assembly Language
Of course if one needs to debug the code then AS7 is essential, but C/Arduino people write perfect code so no need for debug.
Wednesday, 5 June 2019 - 20:20
Programs required to program ATmega328p on Arduino Uno using Assembly Language
My question is: Is this really true? Basically yes, just be aware that if you use a programmer to program the chip you will erase the Arduino bootloader.   But it seems that...
Wednesday, 5 June 2019 - 03:05
burning out the ATmega1284?
Thing may work for a while under stress but won't last long.   Also you MUST use an appropriate value resistor in series with the LED.   You MUST use 100nF bypass caps...
Monday, 3 June 2019 - 03:48
burning out the ATmega1284?
Could a voltage disparity really cause a burn out of a chip??? Yes as I told you Fri. May 24, 2019 and again in my link above.   Unless you have reason to run at 3.3V it is...
Monday, 3 June 2019 - 01:58
burning out the ATmega1284?
What is wrong with the connections made above?  You still haven't figured it out?  Look at the VCC links, the one on the left is jumpered for 3.3V, the one on the right...
Monday, 3 June 2019 - 00:59
burning out the ATmega1284?
See https://www.avrfreaks.net/commen...   If you are still using the same set up as in that thread you will KEEP ON burning chips as I told you there!   Half of your...
Sunday, 2 June 2019 - 02:48
why this is not working ?
OK sorry, back to Studio then.
Saturday, 1 June 2019 - 21:36
why this is not working ?
Again guessing it's an AVR, nothing to do with Studio, moving to AVR forum.
Saturday, 1 June 2019 - 21:06
prog will not past the "for lus
Guessing it's an AVR, nothing to do with Studio, moving to AVR forum.
Saturday, 1 June 2019 - 21:05
How much distance can dc signal travel in cat6 cable?
the signal has a frequency of a few Hz, tops. just want to send the rotation direction signal just high or low. It seems that it's just DC, without the hurts ...  so all...
Monday, 27 May 2019 - 22:07
ATmega1284 does not receive uploaded code from Atmel Studio
esou did you read my reply above? You had most likely destroyed your chip if what I see is correct.
Friday, 24 May 2019 - 01:24

Pages