Post Created date
RET function returning to beginning of code instead of CALL point
Interesting bug with the forum, I also tried to edit the post but it only shows the code in the code box and not the other 2???
Monday, 20 April 2020 - 22:03
Help for Assembly Newb
If you make a build-able program then you can run it in the simulator and you can see what is going on by running it in single step.   Of course you will have to use smaller...
Saturday, 18 April 2020 - 04:32
Invert all BITS in BYTE
POST your code, we can't guess what you are doing.
Tuesday, 14 April 2020 - 01:23
AVR signatures list
Thanks for that but the question is 10 years old. Nowadays not many people bother making their own programmers as you can get them for a few $.
Saturday, 11 April 2020 - 22:15
MPCM mode, send data from slave to master ?
This is the MPCM packet format I have been using for years. It's an adaptation of my early understanding of MPCM. The protocol for the RS485 buss is as follows: It is a 9 bit...
Friday, 10 April 2020 - 21:35
MPCM mode, send data from slave to master ?
MPCM will still work. Have used it with Motorola HC11, HC05, PIC (shivers.... ) AVR and maybe others for a long time.
Thursday, 9 April 2020 - 22:17
converting from CV to winAvr
...and don't forget to change the USB driver....
Wednesday, 8 April 2020 - 22:16
converting from CV to winAvr
Just watch that you don't upgrade your programmer or debugger for AS7 or it will no longer work with AS4.   I have both on AS4 and AS7 my computer but have kept the JTAG Mk2...
Wednesday, 8 April 2020 - 21:46
converting from CV to winAvr
to winavr I hope you know that is it very old and will not support newer chips. Any problems installing AS7 apart from the huge size?   It may be complaining about the upper...
Wednesday, 8 April 2020 - 05:39
Atmega644pa High frequency for 3.3v
The PB version of any new chip is not the same as what you show above! The clock curve seems the same but I only have the 2018 version.    
Wednesday, 8 April 2020 - 03:33
Fast dividing by 5 and by 10 for uint32_t input data for ATMEGA16A
This is the slowest fast division, 2 weeks and still calculating.
Sunday, 5 April 2020 - 22:02
atmega324PA not working at higher than 1MHZ freq
I do not have input and output bypass caps.....It does not do any strange things If only you had an oscilloscope on the pins on the regulator then you WOULD see strange things.
Sunday, 5 April 2020 - 21:51

Pages