Post Created date
RC5 help
I have send you the code I have by replying to your PM. I think there is a led attached to port pb2 or pb6 to indicate when a good code is received. If the led pulses then you...
Sunday, 28 November 2004 - 21:55
RC5 help
AVR410 assumes that the on/off timing of the I/R are pretty much 50% duty cycle, whilst in real life they are not. I posted some code a while ago with the fix. If you do a search...
Sunday, 28 November 2004 - 03:04
SPI to MMC interface
Quote:How do I keep clock active from ATmega128, (the Master) You don't. The SPI slave cannot send data unless the master clocks the CLK pin. Usually the master sends a dummy...
Friday, 26 November 2004 - 02:55
Cheap imitation of
Dear freegeek, You will find quite a lot of "Old Timers" on this site, all the ones that were on the HC11, HC05 Motorola lists that got fed up with Motorola's arrogance and...
Tuesday, 23 November 2004 - 09:15
Migrating to PIC
Quote:About the only advantage I see in the pics from a programmers point of view is that almost all of the data space (64 addresses) can be used as registers in instructions...
Monday, 22 November 2004 - 22:12
always breaks in Disassembler
Let's say that they have a few teething problems (like other companies). But don't be discouraged they only last for a short time...well untill the tool becomes obsolete and you...
Friday, 12 November 2004 - 22:21
always breaks in Disassembler
Well...I'm sure glad to hear this :D It will make me feel at home when I eventually start to use debugwire. It will be just like using the ICE200 all over again :(
Friday, 12 November 2004 - 00:59
Cheap imitation of
:evil: Hmmmm don't like being referred to as an OLD TIMER just because I still use HC11 :twisted: I think they may get some mail from yours truly, will have to register though....
Friday, 12 November 2004 - 00:54
AVR910 ISP -> firmware upgrade
I have only met Haakon Skar (from Atmel) at one of the seminars here in Sydney. Steven Davies is from Australia and he was the author of the article for the Silicon Chips magazine...
Tuesday, 9 November 2004 - 22:16
AVR910 ISP -> firmware upgrade
Quote:I would probably not take long time for the authors to port it to ATtiny2313 I am one of the authors. :D But anyone is welcome to make changes/improvements. I just did some...
Tuesday, 9 November 2004 - 09:37
AVR910 ISP -> firmware upgrade
Quote:I'm not sure I understand what you did. I simply used the AVR910 programmer with V3.0 firmware fitted to program an ATmega8535. If you look at the devices supported by the...
Tuesday, 9 November 2004 - 01:41
AVR910 ISP -> firmware upgrade
For information purposes: I have programmed an Atmega8535 with V3.0 firmware using the ATmega8515 settings (including compatibility fuse) as AVRPROG doesn't support the Mega8535....
Monday, 8 November 2004 - 05:25