Post Created date
Making hexfile w constants to load via AVRStudio. How???
The cseg part puts code in your projectname.hex file, the eseg part puts code in your projectname.eep file. The .hex file gets programmed into the flash, the eep file gets...
Wednesday, 26 January 2005 - 00:05
Making hexfile w constants to load via AVRStudio. How???
Make sure you put the .cseg bit, The assembler was deleting the output files after assembling without it. You can of course put the eseg part at the end of your main code and it...
Monday, 24 January 2005 - 22:22
Making hexfile w constants to load via AVRStudio. How???
I added a bit of code in the cseg because the assembler didn't work too well without it and this is the result. .cseg test: 000000 0000 nop ;...
Monday, 24 January 2005 - 21:44
UPDATE: Atmel AVRprog.exe v1.40!
Of course you can be bold and try to use the real SPI and let us know how it works :-) seeing that you have one already available on your chip. :wink:
Friday, 21 January 2005 - 08:25
4.11 will not see stk500 via usb-2-rs232
Your ICE200 will work like a charm with an Unreal serial port like an USB to RS232 adatptor but it will not wotk with Studio 4 reliably with a real serial port. Just found this by...
Thursday, 20 January 2005 - 06:33
UPDATE: Atmel AVRprog.exe v1.40!
Don't see any reason why it should not just drop into the M8, or any other chip same size or larger than the 2313, just change the definition file for the chip. By all means post...
Thursday, 20 January 2005 - 06:26
Programming MEGA8 eeprom
Quote:without using any code on the mega8 itself. That would be pretty much impossible. I do this in almost all of my projects but I have a monitor program that can be accessed...
Wednesday, 19 January 2005 - 22:45
UPDATE: Atmel AVRprog.exe v1.40!
OK...it's about time I posted an update to the programmer. Here's V3.2 which includes the 3 new devices. Also it is modified for the newer conditional assembler as it has both the...
Wednesday, 19 January 2005 - 22:23
UPDATE: Atmel AVRprog.exe v1.40!
Quote:there are still a lot of free slots between the device-code 0x00 and 0x7F in this executable... And a lot more from 0x7f to 0xff, only a few have been used there for the...
Tuesday, 18 January 2005 - 01:09
UPDATE: Atmel AVRprog.exe v1.40!
DARN...I spend some time last night to find out the new device codes :( ...Didn't read your full post... The Mega 8535 shows the 8515 compatibility fuse...I guess they are pretty...
Monday, 17 January 2005 - 21:27
ATmega128 sub-routine issues
Are you initiliasing your stack pointer?
Monday, 17 January 2005 - 06:23
Can't enter ascii in data memory
You may have to use the painful way. :( Double clicking on the data (the hex side not the ascii side) you get a choice of Hex, Decimal, Octal and Binary. May want to advice Atmel...
Sunday, 16 January 2005 - 22:45

Pages